LL ARC MINI LINE White

Manual text content

USER MANUAL LL ARC MINI LINE WHITE Leader Light s.r.o. M.Gorkeho 33 SK-052 01 Spisska Nova Ves Slovakia www.leaderlight.eu LL40 205 E N v IR o NMENT Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment. WARNING!!! Carefully read before installing, powering or servicing. Nothing to do if anything misunderstand! Installation can be done only by a qualified professional in accordance with relevant local codes. 01 S A f ET y I N fo RMATI o N 01.1 Risk of eyes damage Do not look directly into LED lamps. Do not look into light beam from a distance of less than 40 cm (16 inches)! - - 01.2 Protection from electric shock Shut down power before installation or maintenance. Luminaries, Driver and recommended power supply must be installed by a qualified professional in accordance with relevant local codes. Only acceptable source of power and frequency that complies with local building and electrical codes to use. Do not use or do not connect the products if the power cable, power plug or fixtures are any way damaged, wet, or if they are overheating. Do not modify, alter, or attempt to service the LeaderLight appliance. Doing so will void the warranty. Before removing or installing any cover or part of appliance disconnect from power. - - - - - 01.3 f ire prevention Follow all safety consideration. Thermostatic switches or fuses never to bypass. Device never shield – minimum distance around fitting must be 50mm (2 in.). LEDs never direct cover with filters or other materials. Allowing max. ambient temperature is 40°C (104°F). - - - - - 02 P R od UCT S PECI f ICATI o N 02.1 Technical Specification 03 I NSTALLATI o N 03.1 Unpacking Unpack carefully. This is electronic equipment and should be handled carefully. Damaged delivered package or if are any mechanical parts broken – it must be claim immediately by the transport company. Photo pictures as evidence are valuable or future claim. - - - 03.2 Physical installation Loading capacity of bearing area has to be at least 10 times the weight of all device clusters (luminaries, clamps, cables, ...). Hairbreadth from combustible materials is 0,5m. - - ©MMX - Leader Light – All right reserved If you have any question please, contact support@leaderlight.sk C o MPLIMENTS o N yo UR PURCHASE! LL40 215 LL40 225 Content: 01 SA f ET y IN fo RMATI o N 01.1 Risk of eyes damage 01.2 Protection from electric shock 01.3 Fire prevention 02 P R od UCT S PECI f ICATI o N 02.1 Technical Specification 03 I NSTALLATI o N 03.1 Unpacking 03.2 Physical installation 03.3 Electrical installation 03.3.1 Connecting to AC/DC power supply 03.3.2 Connecting to LL ARC DRIVER for intensity/colour control 04 M AINTENANCE 03.3.1 Connecting to d C power supply (Figure Nr. 1.1) LL ARC MINI LINE must be connected to the device- MW power supply IN:100-260AC/ OUT: 24V. It is not necessary to open fixture before connecting to MW power supply. AC Power Supply Cord plug connections to MW Power supply: - - Symbol Pin Wire Colour Screw (US) L live brown yellow or brass N neutral blue silver ground (earth) yellow/green green 03.3.2 Connecting to LL LE d d RI v ER (Figure Nr. 1.2) For intensity and colour control is necessary connection with LL ARC DRIVER. It is not necessary to open fixture before connecting to LL ARC DRIVER. Before installing of LL ARC DRIVER carefully read USER MANUAL for LL ARC DRIVER. - - - 03.3 Electrical installation To tackle all Safety Information- 01! You can suffer a dangerous electric shock by using a high voltage AC/DC power supply - by touching the AC/DC power supply wires inside LL ARC MINI LINE! LL ARC MINI LINE can be operated in two ways: - 03.3.1 LL ARC MINI LINE connecting to DC POWER SUPPLY - for switch ON/OFF luminaries - 03.3.2 LL ARC MINI LINE connecting to LL ARC DRIVER - for intensity and colour control - - - Edition: A - 2010 All dimensions are in milimeters Φ38 Lamp type: 1200mm: 96xW TOP LED (White) 600mm: 48xW TOP LED (White) 300mm: 24xW TOP LED (White) Lifetime: Long 100 000 hrs 60% degradation v iew Angle: 120° Control data Input: 1 channel 24V dimming Power input: 1200mm: max. 8W 600mm: max. 4W 300mm: max. 2W Power connection: 24V DC 5m cable with 6pin LINE connector Net weight: 1200/600/300mm: 1kg/ 0,6kg/ 0,3kg Dimensions LxΦ: 1200/600/300mm x 38mm without bracket IP: IP20 Ambient temp. (Ta): Maximum 40°C Cooling: Conventional Materials and finish: End cups: plastic Cover: frosted PMMA Installation: Any position for ceiling, wall and surface-mounting 300 600 1200 o peration only with d C 24 v source! By using a high voltage AC power supply-danger of electric shock! f ollowing items are included: - LL ARC MINI LINE with 5m cable and 6pin LINE connector 1 pc. - LL BRACKET MINI LINE FIX 1 pc. - User manual 1 pc. Additional items needed: - LL ARC DRIVER - DC power supply 24V - Controller compatible with DMX - Mounting accessories (adjustable bracket) - Screws and washers M6 If you have any question please, contact support@leaderlight.sk o rder code Product name I C (A) LL40 205 LL ARC MINI LINE White 300 1x0,08A LL40 215 LL ARC MINI LINE White 600 3x0,16A LL40 225 LL ARC MINI LINE White 1200 3x0,32A Accessories: LL41 170 LL BRACKET ARC MINI LINE 300 ADJUSTABLE LL41 171 LL BRACKET ARC MINI LINE 600/1200 ADJUSTABLE LL41 150 LL BRACKET ARC MINI LINE FIX 1.1 d C 24 v max. 10A DIN POWER SUPPLY MW 240 DIN 24V 100-260 v AC LL ARC MINI LINE connecting to d IN P o WER SUPPL y enables to switch o N/ off luminaries. 04 MAINTENANCE To tackle all Safety Information- 01! Damage caused by inadequate cleaning or maintenance is not covered by warranty. Regular cleaning is demand (dust, dirt, ...). Maintenance policy: Unplug mains before maintenance and at least 10 minutes cool off Appliance do not illegal open or demount Clean-up dust only from outer surface (for ex. diffuser). Use vacuum or dumpy duster (warm water) Before reinstalling to check failure-free state – no wet parts! - - - - - - - - 1.2 LL ARC MINI LINE connecting to PWM d RI v ER and d IN P o WER SUPPL y enables to switch o N/ off luminaries and in addition intensity and colour control by d MX controller. max. 16A max. 10A! d C 24 v 100-260 v AC DIN POWER SUPPLY MW 240 DIN 24V DMX CONTR. connect max. 1,4A per GROUP MINI LINE W MINI LINE W MINI LINE W R+ R- G+ G- B+ B- black white White End cup - standard delivery with luminary FIX BRACKET - standard delivery with luminary 180° AIMING P o SSIBILIT y The fixture could be aim to wish position with adjustable bracket. M o UNTING ACCESS o RIES Adjustable bracket