PocketHUB SE 2.0 User Manual

Manual text content

PocketHUB SE 2.0 User Manual High Speed, Portable 4-Port USB 2.0 Hub READ FIRST! 33141PocketHUB_SE_20 6/29/04 9:55 AM Page 1 To connect to a Do this: USB 2.0 port • Plug the cable into your computer’s USB port. You will enjoy full USB 2.0 HI-SPEED performance. • Connect the small 5-pin Type B mini USB connector into the USB hub. This cable is included in the package. Registering Online Take a minute to register your Kensington input device. Registered customers are eligible to receive free technical support, notification of new products, and software updates. To register, start your Web browser and go to: www.register.kensington.com Connecting your PocketHUB SE 2.0 You do not need to turn off your computer before connect- ing or disconnecting a USB device. The included AC power adapter must be used for maximum performance. To connect to a Do this: USB 1.1 port • Plug the cable into your computer’s USB port. The hub will function on a USB 1.1 port but only at USB 1.1 speeds. • Connect the small 5-pin Type B mini USB connector into the USB hub. This cable is included in the package. Note to Windows XP users: The system will warn you: HI-SPEED USB DEVICE Plugged into non-HI-SPEED USB Hub. Click ok . 33141PocketHUB_SE_20 6/29/04 9:55 AM Page 2 Technical Support Tips • You may find the answer to your problem in the Frequently Asked Questions (FAQs) in the Support area of the Kensington Web site http://www.kensington.com . • Call from a phone where you have access to your computer and product. • Please be prepared to provide the following information: – Name, address and telephone number – The name of the Kensington product – Make and model of your computer – Your system software and version – Symptoms of the problem and what led to them Technical Support Technical support is available to all registered users of Kensington products. There is no charge for technical support except long distance charges where applicable. Technical Support Contact information can be found on the inside back cover of this manual. 33141PocketHUB_SE_20 6/29/04 9:55 AM Page 4 shall not be liable for any incidental or consequential damages. Implied warranties or merchantability and fitness for a particular purpose on this product are limited in duration to the duration of this warranty. Some states/ countries do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states/ countries do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state and country to country. 1 Year Warranty KENSINGTON TECHNOLOGY GROUP ("KENSINGTON") warrants this PRODUCT against defects in material and workmanship under normal use and service for one year from the original date of purchase. KENSINGTON, at its option shall repair or replace the defective unit covered by this warranty. Please retain the dated sales receipt as evidence of the date of purchase. You will need it for any warranty service. In order to keep this warranty in effect, the product must have been handled and used as pre- scribed in the instructions accompanying this warranty. This warranty does not cover any damage due to accident, misuse, abuse, or negligence. This warranty is valid only if the product is used on the computer or system specified on the product box. Please check product box for details, or call technical support. Repair or replacement, as provided under this warranty, is your exclusive remedy. KENSINGTON 33141PocketHUB_SE_20 6/29/04 9:55 AM Page 6 Declaration of Conformity Compliance Statement for Kensington PocketHUB SE 2.0 This Kensington PocketHUB SE 2.0 model no. 33141 complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and, (2) this device must accept any interference received, including interference that may cause undesired operation. As defined in Section 2.909 of the FCC Rules, the responsible party for this device is: Kensington Technology Group, 2000 Alameda de las Pulgas, Second Floor, San Mateo, CA 94403 USA, 650-572-2700. Federal Communications Commission Radio Frequency Interference Statement Note: This Kensington PocketHUB SE 2.0 model no. 33141 has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. MODIFICATIONS: Modifications not expressly approved by Kensington may void the user’s authority to operate the device under FCC regulations and must not be made. SHIELDED CABLES: In order to meet FCC requirements, all connections to equipment using a Kensington input device should be made using only the shielded cables provided. 33141PocketHUB_SE_20 6/29/04 9:55 AM Page 8 Support by Telephone Technical Support is available by telephone. Please visit www.kensington.com for hours. US and Canada 800-535-4242 or 650-572-2700 Mexico 52(55)5384-0620 Contacting Kensington Troubleshooting information and answers to frequently asked questions are available 24 hours a day on the Kensington Web site at www.support.kensington.com . 33141PocketHUB_SE_20 6/29/04 9:55 AM Page 10 Kensington Technology Group 2000 Alameda de las Pulgas, Second Floor San Mateo, CA 94403 USA www.kensington.com ACCO Europe PLC Gatehouse Road Bucks, HP19 8DT, UNITED KINGDOM ACCO Canada Inc., 5 Precidio Court Brampton, Ontario L6S 6B7 CANADA This manual is copyright © 2004 Kensington Technology Group, a division of ACCO Brands, Inc. Any unauthorized copying, duplicating, or other reproduction of the contents hereof is prohibited without written consent from Kensington Technology Group. All rights reserved. 07/04 Patents Pending. For full copyright information, please see the electronic MouseWorks Guide. Kensington is a registered trademark of ACCO World Corporation. Windows is a registered trademarks of Microsoft Corporation. All other registered and unregistered trademarks are the sole property of their respective owners. 901-1618-00 33141PocketHUB_SE_20 6/29/04 9:55 AM Page 12