ST700 User Manual

Manual text content

This user manual includes detailed usage instructions for your camera. Please read this manual thoroughly. Basic troubleshooting Quick reference Contents Basic functions Extended functions Shooting options Playback/Editing Settings Appendixes Index User Manual ST700 Ä Click a topic 1 Keep your camera away from small children and pets. Keep your camera and all accessories out of the reach of small children and animals. Small parts may cause choking or serious injury if swallowed. Moving parts and accessories may present physical dangers as well. Do not expose the camera to direct sunlight or high temperatures for an extended period of time. Prolonged exposure to sunlight or extreme temperatures can cause permanent damage to your camera’s internal components. Avoid covering the camera or charger with blankets or clothes. The camera may overheat, which may distort the camera or cause a fire. If liquid or foreign objects enter your camera, immediately disconnect all power sources, such as the battery or charger, and then contact a Samsung service center. Health and safety information Always comply with the following precautions and usage tips to avoid dangerous situations and ensure peak performance of your camera. Warning —situations that could cause injury to yourself or others Do not disassemble or attempt to repair your camera. This may result in electric shock or damage to the camera. Do not use your camera near flammable or explosive gases and liquids. This may cause a fire or explosion. Do not insert flammable materials into the camera or store these materials near the camera. This may cause a fire or electric shock. Do not handle your camera with wet hands. This may result in electric shock. Prevent damage to subjects’ eyesight. Do not use the flash in close proximity (closer than 1 m/3 ft) to people or animals. If you use the flash too close to your subject’s eyes, it can cause temporary or permanent eyesight damage. 2 Caution —situations that could cause damage to your camera or other equipment Remove the batteries from your camera when storing it for an extended period of time. Installed batteries may leak or corrode over time and cause serious damage to your camera. Use only authentic, manufacturer-recommended, Lithium-ion replacement batteries. Do not damage or heat the battery. Unauthorized, damaged, or heated batteries may cause a fire or personal injury. Use only Samsung-approved batteries, chargers, cables and accessories. • Using unauthorized batteries, chargers, cables, or accessories can cause batteries to explode, damage your camera, or cause injury. • Samsung is not responsible for damage or injuries caused by unauthorized batteries, chargers, cables, or accessories. Do not use batteries for unintended purposes. This may cause a fire or electric shock. Do not touch the flash while it fires. The flash is very hot when fired and may burn your skin. When you use AC charger, turn off the camera before you disconnect the power to the AC charger. Failing to do so may result in fire or electric shock. Disconnect chargers from power sources when not in use. Failing to do so may result in fire or electric shock. Do not use a damaged power supply cord, plug, or loose outlet when you charge batteries. These may cause a fire or electric shock. Do not allow the AC charger to come in contact with the +/- terminals on the battery. This may cause a fire or electric shock. Do not force the camera’s parts or apply pressure to the camera. This may cause your camera to malfunction. Health and safety information 3 Health and safety information Exercise caution when you connect cables or adapters and install batteries and memory cards. If you force the connectors, improperly connect cables, or improperly install batteries and memory cards, you can damage ports, connectors, and accessories. Keep cards with magnetic strips away from the camera case. Information stored on the card may be damaged or erased. Never use a damaged charger, battery, or memory card. This may result in electric shock or camera malfunction or cause a fire. Check that the camera is operating properly before use. The manufacturer takes no responsibility for any loss of files or damage that may result from camera malfunction or improper use. You must plug the end of the USB cable with the indicator light ( S ) into your camera. If the cable is reversed, it may damage your files. The manufacturer is not responsible for any loss of data. 4 Copyright information • Microsoft Windows and the Windows logo are registered trademarks of the Microsoft Corporation. • Mac is a registered trademark of the Apple Corporation. • HDMI, the HDMI logo and the term “High Definition Multimedia Interface” are trademarks or registered trademarks of HDMI Licensing LLC. • microSD™ and microSDHC™ are registered trademarks of the SD Association. • Trademarks and trade names used in this manual are the property of their respective owners. • Camera specifications or contents of this manual may be changed without prior notice due to upgrade of camera functions. • You are not allowed to reuse or distribute any part of this manual without prior permission. • For Open Source License information, refer to the ‘OpenSourceInfo.pdf’ in the provided CD-ROM. Outline of the User Manual Basic functions 12 Learn about your camera’s layout, icons, and basic functions for shooting. Extended functions 33 Learn how to capture a photo, record a video, and voice memo by selecting a mode. Shooting options 54 Learn how to set the options in Shooting mode. Playback/Editing 81 Learn how to play back photos, videos, or voice memos and edit photos or videos. Also, learn how to connect your camera to your computer, photo printer, TV or HDTV. Settings 108 Refer to options to configure your camera’s settings. Appendixes 115 Get information about error messages, specifications, and maintenance. 5 Icons used in this manual Icon Function Additional information Safety warnings and precautions [ ] Camera buttons. For example, [ Shutter ] represents the shutter button. ( ) Page number of related information “ The order of options or menus you must select to perform a step; for example: Touch m “ Photo Size (represents Touch m , and then touch Photo Size ). * Annotation Abbreviations used in this manual Abbreviation Definition AEB Auto Exposure Bracket AF Auto Focus DIS Digital Image Stabilization DPOF Digital Print Order Format EV Exposure Value ISO International Organization for Standardization OIS Optical Image Stabilization WB White Balance 6 Pressing the shutter • Half-press [ Shutter ]: press the shutter halfway down • Press [ Shutter ]: press the shutter all the way down Half-press [ Shutter ] Press [ Shutter ] Subject, background, and composition • Subject : the main object in a scene, such as a person, animal, or still life • Background : the objects around the subject • Composition : the combination of a subject and background Composition Background Subject Exposure (Brightness) The amount of light that enters your camera determines the exposure. You can alter the exposure with shutter speed, aperture value, and ISO sensitivity. By altering the exposure, your photos will be darker or lighter. Normal exposure Overexposure (too bright) Expressions used in this manual 7 Basic troubleshooting Learn to solve common problems by setting shooting options. The subject’s eyes appear red. Red eye is caused by the reflection of light from the camera flash off the back of the eye. • Set the flash option to Red-eye or Red-eye Fix . (p. 59) • If the photo has already been captured, select Red-eye Fix in the edit menu. (p. 97) Photos have dust spots. If dust particles are present in the air, you may capture them in photos when you use the flash. • Turn off the flash or avoid capturing photos in a dusty place. • Set ISO sensitivity options. (p. 61) Photos are blurred. Blurring can occur if you capture photos in low light conditions or hold the camera incorrectly. • Use the OIS function or half-press [ Shutter ] to ensure the subject is focused. (p. 30) • Use the DUAL IS mode. (p. 39) Photos are blurred when shooting at night. As the camera tries to let in more light, the shutter speed slows. This can make it difficult to hold the camera steady enough to take a clear picture and may result in camera shake. • Select Night Shot mode. (p. 37) • Turn on the flash. (p. 59) • Set ISO sensitivity options. (p. 61) • Use a tripod to prevent your camera from shaking. Subjects come out too dark because of backlighting. When the light source is behind the subject or when there is a high contrast between the light and dark areas, the subject may appear too dark. • Avoid shooting toward the sun. • Select Backlight in Scene mode. (p. 36) • Set the flash option to Fill in . (p. 59) • Adjust the exposure. (p. 69) • Set the metering option to Spot if a bright subject is in the center of the frame. (p. 70) 8 Quick reference Capturing photos of people • Beauty Shot mode f 37 • Pose Guide mode f 40 • Self-Shot mode f 43 • Children mode f 44 • Red-eye/Red-eye Fix (to prevent or correct red-eye) f 59 • Face Detection f 65 Capturing photos at night or in the dark • Scene mode > Sunset, Dawn f 36 • Night Shot mode f 37 • Flash options f 59 • ISO sensitivity (to adjust the sensitivity to light) f 61 Capturing action photos • Continuous, Motion Capture f 73 Capturing photos of text, insects, or flowers • Scene mode > Text f 36 • Close-up Shot mode f 36 • Macro f 62 Adjusting the exposure (brightness) • ISO sensitivity (to adjust the sensitivity to light) f 61 • EV (to adjust exposure) f 69 • Metering f 70 • AEB (to take 3 photos of the same scene with different exposures) f 73 Applying effects to photos • Magic Frame shot mode f 47 • Photo Filter mode f 47 • Vignetting mode f 50 • Smart Filter effects f 74 • Image Adjust (to adjust Sharpness, Contrast, or Saturation) f 77 Applying different effects to videos • Movie Filter mode f 49 • Vignetting mode f 50 • Palette Effect Shot mode f 51 Reducing camera shake • Optical Image Stabilization (OIS) f 30 • DUAL IS mode f 39 • Viewing files by category in Smart album f 85 • Viewing files as thumbnails f 86 • Deleting files on the memory card f 88 • Viewing files as a slide show f 90 • Viewing files on a TV or HDTV f 98 • Connecting your camera to a computer f 100 • Adjusting sound and volume f 110 • Adjusting the brightness of the display f 111 • Changing the display language f 112 • Setting the date and time f 112 • Before contacting a service center f 125 9 Contents Extended functions .......................................................... 33 Using shooting modes ................................................ 34 Using the Smart Auto mode ........................................ 34 Using the Simple Shot mode ....................................... 35 Using the Scene mode ............................................... 36 Using the Close-up Shot mode ................................... 36 Using the Night Shot mode ......................................... 37 Using the Beauty Shot mode ....................................... 37 Using the Program mode ............................................ 38 Using the DUAL IS mode ........................................... 39 Using the Pose Guide mode ....................................... 40 Using the Movie mode ................................................ 41 Using the Smart Movie mode ...................................... 42 Capturing photos with the front display ...................... 43 Using the Self-Shot mode ......................................... 43 Using the Children mode ........................................... 44 Using the Jump Shot mode ....................................... 46 Using effect modes ..................................................... 47 Using the Magic Frame shot mode .............................. 47 Using the Photo Filter mode ........................................ 47 Using the Movie Filter mode ........................................ 49 Using the Vignetting mode .......................................... 50 Using the Palette Effect mode ..................................... 51 Recording voice memos ............................................. 52 Recording a voice memo ............................................ 52 Adding a voice memo to a photo ................................. 53 Basic functions ................................................................. 12 Unpacking ................................................................... 13 Camera layout ............................................................. 14 Inserting the battery and memory card ....................... 16 Charging the battery and turning on your camera ...... 17 Charging the battery ................................................... 17 Turning on your camera .............................................. 17 Performing the initial setup ......................................... 18 Learning icons ............................................................. 20 Using the touch screen ............................................... 21 Setting the touch screen and sound ........................... 23 Setting the display type for the touch screen ................. 23 Setting the sound ....................................................... 23 Using the Home screen ............................................... 24 Accessing the Home screen ....................................... 24 Icons on the Home screen .......................................... 24 Rearranging icons ...................................................... 26 Capturing photos ......................................................... 27 Turning on the front display .......................................... 28 Zooming .................................................................... 28 Reducing camera shake (OIS) ................................... 30 Tips for getting a clearer photo ................................... 31 10 Contents Shooting options .............................................................. 54 Selecting a resolution and quality ............................... 55 Selecting a resolution .................................................. 55 Selecting image quality ............................................... 56 Using the timer ............................................................ 58 Shooting in the dark .................................................... 59 Preventing red-eye ..................................................... 59 Using the flash ........................................................... 59 Adjusting the ISO sensitivity ......................................... 61 Changing the camera’s focus ..................................... 62 Using macro .............................................................. 62 Using smart touch focus ............................................. 63 Using one touch shooting ........................................... 64 Adjusting the focus area .............................................. 64 Using face detection ................................................... 65 Detecting faces .......................................................... 65 Capturing a smile shot ................................................ 66 Detecting eye blinking ................................................. 66 Using Smart Face Recognition .................................... 67 Registering faces as your favorites (My Star) ................. 68 Adjusting brightness and color ................................... 69 Adjusting the exposure manually (EV) ........................... 69 Changing the metering option ...................................... 70 Selecting a light source (White balance) ........................ 71 Using burst modes ...................................................... 73 Applying effects/Adjusting images .............................. 74 Applying Smart Filter effects ........................................ 74 Adjusting your photos ................................................. 77 Decreasing the sound of the zoom when recording a video ............................................................................ 78 Available shooting options by shooting mode ............ 79 11 Contents Playback/Editing ............................................................... 81 Viewing photos or videos in Playback mode .............. 82 Starting Playback mode .............................................. 82 Viewing photos .......................................................... 89 Playing a video ........................................................... 91 Playing a voice memo ................................................. 92 Editing a photo ............................................................ 94 Resizing photos ......................................................... 94 Rotating a photo ......................................................... 95 Applying Smart Filter effects ........................................ 95 Adjusting your photos ................................................. 96 Creating a print order (DPOF) ....................................... 97 Viewing files on a TV or HDTV ..................................... 98 Transferring files to your Windows computer ........... 100 Transferring files with Intelli-studio ............................... 101 Transferring files by connecting the camera as a removable disk ......................................................... 103 Disconnecting the camera (for Windows XP) ............... 104 Transferring files to your Mac computer ................... 105 Printing photos with a PictBridge photo printer ....... 106 Settings ........................................................................... 108 Settings menu ........................................................... 109 Accessing the settings menu .................................... 109 Sound ..................................................................... 110 Display .................................................................... 110 Connectivity ............................................................. 111 General ................................................................... 112 Appendixes ..................................................................... 115 Error messages ......................................................... 116 Camera maintenance ................................................ 117 Cleaning your camera ............................................... 117 Using or storing the camera ...................................... 118 About memory cards ................................................ 119 About the battery ...................................................... 121 Before contacting a service center ........................... 125 Camera specifications ............................................... 128 Glossary ..................................................................... 132 FCC notice ................................................................. 137 Index .......................................................................... 138 Unpacking ………………………………… 13 Camera layout ……………………………… 14 Inserting the battery and memory card … 16 Charging the battery and turning on your camera ……………………………………… 17 Charging the battery ……………………… 17 Turning on your camera ………………… 17 Performing the initial setup ……………… 18 Learning icons ……………………………… 20 Using the touch screen …………………… 21 Setting the touch screen and sound …… 23 Setting the display type for the touch screen …………………………………… 23 Setting the sound ………………………… 23 Using the Home screen …………………… 24 Accessing the Home screen ……………… 24 Icons on the Home screen ……………… 24 Rearranging icons ………………………… 26 Capturing photos ………………………… 27 Turning on the front display ……………… 28 Zooming ………………………………… 28 Reducing camera shake (OIS) ………… 30 Tips for getting a clearer photo …………… 31 Basic functions Learn about your camera’s layout, icons, and basic functions for shooting. Basic functions 13 Unpacking The following items are included in your product box. Camera AC adapter/USB cable Rechargeable battery Strap Touch pen Cleaner User Manual CD-ROM Quick Start Manual Optional accessories Camera case HDMI cable A/V cable Battery charger Memory card/ Memory card adapter The illustrations may differ slightly from the items shipped with your product. Basic functions 14 Camera layout Before you start, familiarize yourself with your camera’s parts and their functions. Battery chamber cover Insert a memory card and battery Tripod mount Shutter button POWER button AF-assist light/Timer lamp Flash Lens USB and A/V port Accepts USB cable and A/V cable HDMI port Accepts HDMI cable Front LCD button Front display Basic functions 15 Camera layout Status lamp • Blinking : When the camera is saving a photo or video, being read by a computer or printer, or out of focus • Steady : When the camera is connecting to a computer or in focus Zoom button • In Shooting mode : Zoom in or out • In Playback mode : Zoom in on part of a photo or view files as thumbnails Playback button Main display* * Referred to as " Touch screen " in this manual. Microphone x y Home button Attaching the strap Speaker Basic functions 16 Inserting the battery and memory card Learn how to insert the battery and an optional memory card into the camera. Removing the battery and memory card Memory card Push the card gently until it disengages from the camera, and then pull it out of the slot. Rechargeable battery Slide the lock up to release the battery. You can use the internal memory for temporary storage if a memory card is not inserted. Battery lock Insert a memory card with the gold-colored contacts facing up. Memory card Insert the battery with the Samsung logo facing up. Rechargeable battery Basic functions 17 Charging the battery and turning on your camera Turning on your camera Press [ POWER ] to turn your camera on or off. • The initial setup screen appears when you turn on the camera for the first time. (p. 18) Turning on your camera in Playback mode Press [ Playback ]. The camera turns on and immediately accesses Playback mode. If you turn on your camera by pressing and holding [ Playback ] for about 5 seconds, the camera does not emit any sounds. Charging the battery Before you use the camera for the first time, you must charge the battery. Attach the USB cable to the AC adapter, and then plug the end of cable with the indicator light into your camera. Indicator light • Red : Charging • Orange : Error • Green : Fully charged Basic functions 18 Performing the initial setup When the initial setup screen appears, follow the steps below to configure the camera’s basic settings. 4 Touch Home , and then touch z or x to select a time zone. • When you travel to another country, touch Visit , and then select a new time zone. London Time Zone 5 Touch o to save. 6 Touch Date/Time Set . 1 Touch Language . 2 Select a language, and then touch o . 3 Touch Time Zone . Basic functions 19 Performing the initial setup 7 Touch the up or down arrows to set the date. Date/Time Set Year Month Day 8 Touch , and then touch the up or down arrows to set the time. Date/Time Set Hr Min • To set daylight-saving time, touch . 9 Touch o to save. 10 Touch Touch Calibration . 11 Touch the target on the screen with your touch pen. Touch Calibration Touch directly in the center of the target for optimal performance. 12 Touch o to save settings. Basic functions 20 Icon Description Memory card inserted • : Fully charged • : Partially charged • : Empty (Recharge) Photo resolution Video resolution Frame rate Audio recording Metering Optical Image Stabilization (OIS) Exposure value adjusted ISO sensitivity White balance Burst type Flash Intelli zoom is on Smart Filter Image Adjust Face detection Auto focus Learning icons The icons the camera displays on the screen change according to the mode you select or the options you set. Icon Description Current time Aperture value Shutter speed Voice memo Timer Front display is on Auto focus frame Camera shake Zoom indicator Zoom ratio Photo resolution when Intelli zoom is on Grid lines 3 Status icons Icon Description Available recording time Available number of photos Memory card not inserted (Internal memory) 1 Option icons (touch) Icon Description Flash option Auto focus option Timer option m Shooting options Display type 2 Status icons Icon Description Shooting mode Current date 2 3 1 Basic functions 21 Using the touch screen Learn how to use the touch screen. Use the supplied touch pen to touch or drag on the screen. Do not use sharp objects, such as pens or pencils, to touch the screen. You can damage the screen. Flicking Gently flick the touch pen across the screen. Touching Touch an icon to select a menu or option. Smart Auto Smart Movie Self-Shot Program Settings Album Pose Guide Children Dragging Touch and hold a part of the screen, and then drag the touch pen. Auto WB Daylight Cloudy Fluorescent_H White Balance Basic functions 22 Using the touch screen • The touch screen may not recognize your inputs if you touch multiple items at the same time. • The touch screen may not recognize your inputs if you touch the screen with your finger. • When you touch or drag the screen, discolorations may occur. This is not a malfunction, but a characteristic of the touch screen. Touch or drag lightly to minimize the effect. • The touch screen may not work properly if you use the camera in extremely humid environments. • The touch screen may not work properly if you apply screen protection film or other accessories to the screen. • Depending on the viewing angle, the screen may appear dim. Adjust the brightness or viewing angle to improve the resolution. Selecting an option • Drag the option list up or down until you find the desired option. Touch the option, and then touch o . Auto WB Daylight Cloudy Fluorescent_H White Balance • If an option has a setting button, touch the button to turn it on or off. Drive Smart Filter Image Adjust OIS Basic functions 23 Setting the touch screen and sound Learn how to change the screen display type and the sound settings. The touch screen displays differently depending on the screen type you select. Setting the sound Set whether your camera emits a sound when you perform functions. 1 On the Home screen, touch . 2 Touch Sound . 3 Touch the setting button next to Beep Sound to turn on or off the beep. Setting the display type for the touch screen You can select a display type to show icons and options. 1 On the Home screen, touch . 2 Touch . 3 Select an option, and then touch o . Full Hide Guide Line Display Set Icon Description Full : Icons are always displayed. Hide : Icons are hidden if you perform no operation for 5 seconds (touch the screen to display the icons again). Guide Line : Grid lines are displayed. The grid lines are helpful for getting the photo aligned with a surface, such as the horizon or the edges of buildings. Basic functions 24 Using the Home screen You can select a shooting mode or access the settings menu by touching the icons on the Home screen. Accessing the Home screen In Shooting or Playback mode, press [ HOME ]. Press [ HOME ] again to return to the previous mode. Smart Auto Smart Movie Self-Shot Program Settings Album Pose Guide Children Smart Auto Smart Movie Self-Shot Program Settings Album Pose Guide Children 1 2 No. Description 1 Touch an icon to access a mode or function. • Scroll to another page by dragging or flicking the touch pen on the screen. 2 The number of the current page. ( ) Icons on the Home screen Icon Description Smart Auto : Capture a photo with a scene mode selected automatically by the camera. (p. 34) Program : Capture a photo with settings you have adjusted manually. (p. 38) Smart Movie : Record a video with a scene mode selected automatically by the camera. (p. 42) Self-Shot : Use the front display when you capture photos of yourself. (p. 43) Children : Attract children’s attention with a short animation on the front display. (p. 44) Pose Guide : Align the subject with the guide line that appears on the screen and capture a photo with a desired pose. (p. 40) Album : View files by category in Smart album. (p. 85) Settings : Adjust settings to match your preferences. (p. 109) Jump Shot : Let your subjects know the best moment to jump with a countdown on the front display. (p. 46) Movie : Record a video. (p. 41) Basic functions 25 Using the Home screen Icon Description Simple Shot : Capture a photo with simple adjustments to brightness and color. (p. 35) DUAL IS : Reduce camera shake both optically and digitally to prevent blurred photos. (p. 39) Slide Show : View photos as a slide show with effects and music. (p. 90) Voice Recorder : Record and save a voice memo. (p. 52) Magazine View : View files with page flip effect. (p. 86) Icon Description Scene : Capture a photo with options that are preset for a specific scene. (p. 36) Vignetting : Capture a photo or record a video with a vignetting effect. (p. 50) Beauty Shot : Capture a portrait with options to hide facial imperfections. (p. 37) Magic Frame shot : Capture a photo with various frame effects. (p. 47) Photo Editor : Edit photos with various effects. (p. 95) Photo Filter : Capture a photo with various filter effects. (p. 47) Movie Filter : Record a video with various filter effects. (p. 49) Night Shot : Capture a night scene by adjusting shutter speed and aperture value. (p. 37) Palette Effect Shot : Record a video with palette effects. (p. 51) Close-up Shot : Capture close-up photos of subjects. (p. 36) Basic functions 26 Using the Home screen Rearranging icons You can rearrange the icons on the Home screen in any order. 1 Touch and hold an icon. Smart Auto Smart Movie Self-Shot Program Settings Album Pose Guide Children 2 Drag it to a new location. • To move an icon to another page, drag it to the left or right edge of the screen. When you drop the icon to a new location, the other icons will neatly slide out of the way. Album Smart Movie Self-Shot Program Settings Smart Auto Children Pose Guide Basic functions 27 Capturing photos Learn how to capture photos easily and quickly in Smart Auto mode. 3 Half-press [ Shutter ] to focus. • A green frame means the subject is in focus. • A red frame means the subject is out of focus. 4 Press [ Shutter ] to capture a photo. See page 31 for tips to get clearer photos. 1 On the Home screen, touch . Smart Auto Smart Movie Self-Shot Program Settings Album Pose Guide Children 2 Align your subject in the frame. Basic functions 28 Capturing photos Zooming You can capture close-up photos by adjusting the zoom. Your camera has a 5X Optical zoom, 4X Intelli zoom, and 4X Digital zoom. The Intelli zoom and Digital zoom cannot be used at the same time. Zoom in Zoom out Zoom ratio The available zoom ratio for videos differs from the photo zoom ratio. Turning on the front display The front display helps you capture photos or videos while viewing yourself. In Shooting mode, press the front LCD button. • You can tap the front display to turn it on, and tap it again or press the front LCD button to turn it off. • When the front display turns on, the touch screen will lock. To unlock the touch screen, touch and hold until reaches . • In Self-Shot, Children and Jump Shot modes, the front display will activate automatically. • When you set timer options, the front display will remain active. (p. 58) • When you use the camera in brightly lit or sunny areas, you may not be able to see the front display clearly. • When you put pressure on the camera or open the battery cover, the front display may activate. Basic functions 29 Capturing photos Digital zoom If the zoom indicator is in the digital range, your camera is using the Digital zoom. By using both the Optical zoom and Digital zoom, you can zoom in up to 20 times. Optical range Digital range Zoom indicator • The Digital zoom is available only in Program and Scene (except Text ) modes. • The Digital zoom is not available with a Smart Filter effect or Smart Touch AF option, Face Detection option, and burst option. • If you capture a photo with the Digital zoom, the photo quality may deteriorate. Intelli zoom If the zoom indicator is in the Intelli range, your camera is using the Intelli zoom. Photo resolution varies according to the zoom rate if you use the Intelli zoom. By using both the Optical zoom and Intelli zoom, you can zoom in up to 20 times. Photo resolution when the Intelli zoom is on Optical range Intelli range Zoom indicator • The Intelli zoom is available only in Program, and Scene (except Text ) modes. • The Intelli zoom is not available with a Smart Filter effect or Smart Touch AF option, Face Detection option, and burst option. • The Intelli zoom is available only when you set a 4:3 resolution ratio. If you set another resolution ratio with Intelli zoom on, the Intelli zoom will be turned off automatically. • The Intelli zoom helps you capture a photo with less quality deterioration than the Digital zoom. However, the photo quality may be lower than when you use the Optical zoom. Basic functions 30 Capturing photos Setting Intelli zoom 1 In Shooting mode, touch m . 2 Touch the setting button next to Intelli Zoom . Reducing camera shake (OIS) Reduce camera shake optically in Shooting mode. Before correction After correction 1 In Shooting mode, touch m . 2 Touch the setting button next to OIS . Drive Smart Filter Image Adjust OIS • OIS may not function properly when: - you move your camera to follow a moving subject - you use the Digital zoom - there is too much camera shake - the shutter speed is slow (for example, when you capture night scenes) - the battery is low - you capture a close-up shot • If you use the OIS function with a tripod, the vibration of the OIS sensor may blur your images. Deactivate the OIS function when you use a tripod. • If the camera is hit or dropped, the display will be blurry. If this occurs, turn off the camera, and then turn it on again. Basic functions 31 Holding your camera correctly Ensure nothing is blocking the lens. Half-pressing the shutter button Half-press [ Shutter ] and adjust the focus. The camera adjusts the focus and exposure automatically. The camera sets the aperture value and shutter speed automatically. Focus frame • Press [ Shutter ] to capture the photo if the focus frame appears in green. • Change the composition and half-press [ Shutter ] again if the focus frame appears in red. Reducing camera shake • Set the Optical Image Stabilization option to reduce camera shake. (p. 30) • Select the DUAL IS mode to reduce camera shake both optically and digitally. (p.39) When h is displayed Camera shake When you shoot in the dark, avoid setting the flash option to Slow Sync or Off . The aperture remains open longer and it may be harder to hold the camera steady enough to take a clear picture. • Use a tripod or set the flash option to Fill in . (p. 59) • Set ISO sensitivity options. (p. 61) Tips for getting a clearer photo Basic functions 32 Preventing your subject from being out of focus It may be difficult to get your subject in focus when: - there is little contrast between the subject and background (for example, when your subject is wearing clothing that is similar in color to the background) - the light source behind the subject is too bright - the subject is shiny or reflective - the subject includes horizontal patterns, such as blinds - the subject is not positioned in the center of the frame Using the focus lock Half-press [ Shutter ] to focus. When the subject is in focus, you can reposition the frame to change the composition. When you are ready, press [ Shutter ] to capture your photo. • When you capture photos in low light Turn on the flash. (p. 59) • When subjects are moving rapidly Use the Continuous or Motion Capture function. (p. 73) Extended functions Learn how to capture a photo, record a video, and record a voice memo by selecting a mode. Using shooting modes …………………… 34 Using the Smart Auto mode ……………… 34 Using the Simple Shot mode …………… 35 Using the Scene mode …………………… 36 Using the Close-up Shot mode ………… 36 Using the Night Shot mode ……………… 37 Using the Beauty Shot mode …………… 37 Using the Program mode ………………… 38 Using the DUAL IS mode ………………… 39 Using the Pose Guide mode ……………… 40 Using the Movie mode …………………… 41 Using the Smart Movie mode …………… 42 Capturing photos with the front display … 43 Using the Self-Shot mode ……………… 43 Using the Children mode ………………… 44 Using the Jump Shot mode ……………… 46 Using effect modes ………………………… 47 Using the Magic Frame shot mode ……… 47 Using the Photo Filter mode ……………… 47 Using the Movie Filter mode ……………… 49 Using the Vignetting mode ……………… 50 Using the Palette Effect mode …………… 51 Recording voice memos ………………… 52 Recording a voice memo ………………… 52 Adding a voice memo to a photo ………… 53 Extended functions 34 Using shooting modes Capture photos or record videos by selecting the best shooting mode for the conditions. Scene Icon Description Portraits at night Landscapes with backlighting Portraits with backlighting Portraits Close-up photos of objects Close-up photos of text Sunsets Clear skies Forested areas Close-up photos of colorful subjects Camera is stabilized or on a tripod (when shooting in the dark) Actively moving subjects Fireworks (when using a tripod) Using the Smart Auto mode In Smart Auto mode, your camera automatically chooses the appropriate camera settings based on the type of scene it detects. The Smart Auto mode is helpful if you are not familiar with the camera settings for various scenes. 1 On the Home screen, touch . 2 Align your subject in the frame. • The camera automatically selects a scene and adjusts its settings. An appropriate scene icon appears at the top left of the screen. The icons are listed below. Scene Icon Description Landscapes Scenes with bright white backgrounds Landscapes at night (when the flash is off) Extended functions 35 Using shooting modes 3 Half-press [ Shutter ] to focus. • In several scenes, the camera automatically captures a photo when you half-press [ Shutter ]. 4 Press [ Shutter ] to capture the photo. • If the camera does not recognize an appropriate scene mode, it uses the default settings for the Smart Auto mode. • Even if it detects a face, the camera may not select a portrait mode depending on the subject's position or lighting. • The camera may not select the correct scene depending on the shooting conditions, such as camera shake, lighting, or distance to the subject. • Even if you use a tripod, the camera may not detect the mode if the subject is moving. • In Smart Auto mode, the camera consumes more battery power, because it changes settings often to select appropriate scenes. Using the Simple Shot mode In Simple Shot mode, you can capture photos with simple adjustments to brightness and color. 1 On the Home screen, touch . 2 Drag the sliders or touch the sample photos to adjust Brightness and Color . Brightness Color 3 Align your subject in the frame, and then half-press [ Shutter ] to focus. 4 Press [ Shutter ] to capture the photo. Extended functions 36 Using shooting modes Using the Scene mode In Scene mode, you can capture a photo with options that are preset for a specific scene. 1 On the Home screen, touch . 2 Touch a scene. Scene Description Landscape : Capture still-life scenes and landscapes. Sunset : Capture scenes at sunset, with natural-looking reds and yellows. Dawn : Capture scenes at sunrise. Backlight : Capture backlit subjects. Beach & Snow : Reduce underexposure of subjects caused by sunlight reflected from sand or snow. Text : Clearly capture text from printed or electronic documents. 3 Align your subject in the frame, and then half-press [ Shutter ] to focus. 4 Press [ Shutter ] to capture the photo. Using the Close-up Shot mode In Close-up Shot mode, you can capture close-up photos of subjects, such as flowers or insects. 1 On the Home screen, touch . 2 Align your subject in the frame, and then half-press [ Shutter ] to focus. 3 Press [ Shutter ] to capture the photo. Extended functions 37 Using shooting modes Using the Beauty Shot mode In Beauty Shot mode, you can capture a portrait with options to hide facial imperfections. 1 On the Home screen, touch . 2 Drag the sliders or touch the sample photos to adjust the Face Tone and Face Retouch . • For example, increase the Face Tone setting to make skin appear lighter. Face Tone Face Retouch 3 Align your subject in the frame, and then half-press [ Shutter ] to focus. 4 Press [ Shutter ] to capture the photo. In Beauty Shot mode, the focus distance will be set to Auto Macro. Using the Night Shot mode In Night Shot mode, you can use a slow shutter speed to extend the time the shutter stays open. Increase the aperture value to prevent overexposure. 1 On the Home screen, touch . 2 Drag the dials on the screen to the arrow directions below to adjust shutter speed and aperture value. Shutter Speed Aperture 3 Align your subject in the frame, and then half-press [ Shutter ] to focus. 4 Press [ Shutter ] to capture the photo. Use a tripod to prevent blurry photos. Extended functions 38 Using shooting modes Using the Program mode In Program mode, you can set most options, except the shutter speed and aperture value, which the camera sets automatically. 1 On the Home screen, touch . 2 Touch m , and then set desired options. (For a list of options, refer to page 54.) 3 Align your subject in the frame, and then half-press [ Shutter ] to focus. 4 Press [ Shutter ] to capture the photo. Setting My screen In Program mode, you can add shortcuts for your favorite options to the left side of the screen. 1 In Shooting mode, touch m “ My screen “ o . 2 Touch and hold one of the icons on the right. OK Cancel Reset My screen EV Extended functions 39 Using shooting modes 3 Drag the icon into a desired box on the left. • To remove shortcuts, drag an icon to the right. OK Reset Cancel EV My screen 4 Touch o to save. You can create up to 3 shortcuts. Using the DUAL IS mode Reduce camera shake and prevent blurred photos with Optical and Digital Image Stabilization functions. Before correction After correction 1 On the Home screen, touch . 2 Align your subject in the frame, and then half-press [ Shutter ] to focus. Extended functions 40 Using shooting modes 3 Press [ Shutter ] to capture the photo. • The Digital zoom and Intelli-zoom are not available in DUAL IS mode. • The camera will optically correct photos only when the light source is brighter than fluorescent light. • If your subject is moving rapidly, the photo may be blurry. • Set the OIS function to reduce camera shake in other shooting modes. (p. 30) Using the Pose Guide mode In Pose Guide mode, the camera displays a guide for the posture that you have selected. Align the subject with the guide before capturing the photo. 1 On the Home screen, touch . 2 Select a pose guide, and then touch . 3 Align your subject with the guide that appears on the screen. Icon Description View information about the pose. Adjust the face tone. Make the subject's skin tone appear lighter. Select another pose guide. 4 Half-press [ Shutter ] to focus. 5 Press [ Shutter ] to capture the photo. Extended functions 41 Using shooting modes Using the Movie mode In Movie mode, you can record high-definition videos of up to 20 minutes in length. The camera saves recorded videos as MP4 (H.264) files. • H.264 (MPEG-4 part10/AVC) is a high-compression video format established by the international standard organizations ISO-IEC and ITU-T. • Some memory cards may not support high definition recording. If this occurs, set a lower resolution. • Memory cards with slow write speeds will not support high-resolution videos and high-speed videos. To record high-resolution or high- speed videos, use memory cards with faster write speeds. • If you activate the OIS function, the camera may record the operating sound of the OIS function. 1 On the Home screen, touch . 2 Touch m , and then set desired options. (For a list of options, refer to page 54.) 3 Press [ Shutter ] or touch to start recording. • Press the front LCD button to record a movie while watching yourself. 4 Press [ Shutter ] again or touch to stop recording. Pause recording The camera allows you to temporarily pause a video while recording. With this function, you can record separate scenes as a single video. • Touch to pause while recording. • Touch to resume. Extended functions 42 Using shooting modes Using the Smart Movie mode In Smart Movie mode, your camera automatically chooses the appropriate camera settings based on the scene it has detected. 1 On the Home screen, touch . 2 Align your subject in the frame. • The camera automatically selects a scene and adjusts its settings. An appropriate scene icon will appear at the top left of the screen. The icons are listed below. Scene Icon Description Landscapes Sunsets Clear skies Forested areas 3 Press [ Shutter ] or touch to start recording. 4 Press [ Shutter ] again or touch to stop recording. • If the camera does not recognize an appropriate scene mode, it uses the default settings for Smart Movie mode. • The camera may not select the correct scene depending on the shooting conditions, such as camera shake, lighting, and distance to the subject. • Smart Filter effects are not available in Smart Movie mode. Extended functions 43 Capturing photos with the front display The front display helps you capture self-portraits or photos of children. You can also use the Jump Shot Timer with the front display. You can tap the front display to turn it on, and tap it again or press the front LCD button to turn it off. Capturing an Easy Self Shot If you press the front LCD button when the power is off, the front display turns on in Easy Self Shot mode. Because the touch screen is off, the camera consumes less battery power and you can prevent others from viewing the touch screen. • The camera will turn off when you press the front LCD button again or press [ POWER ]. • The front display will turn off and the touch screen will turn on when you press [ HOME ]. Using the Self-Shot mode Conveniently capture photos of yourself with the front display. 1 On the Home screen, touch . • Your camera will automatically detect your face and display a frame to indicate the detected face. 2 Half-press [ Shutter ] to focus. 3 Press [ Shutter ] to capture the photo. In Self-Shot mode, the front display will activate and the touch screen will lock. To unlock the touch screen, touch and hold until reaches . Extended functions 44 Capturing photos with the front display Customizing the front display You can let subjects know when to smile, attract their attention to the lens, or let them see the focused area in a magnified form. 1 In Shooting mode, touch m “ Half Shutter . 2 Select an option, and then touch o . Off Smile Icon Eyesight catching Magnifier Half Shutter Icon Description Off : No icon will appear on the front display. Smile Icon : Set an icon to appear that prompts the subject to smile. Eyesight catching : Set an icon to appear to attract the subject’s attention to the lens. Magnifier : Touch an area to magnify it and show it on the front display. Using the Children mode The Children mode attracts children by showing a short animation on the front display. 1 On the Home screen, touch . • The front display will activate and play the most recently used animation. Extended functions 45 Capturing photos with the front display 2 Touch m “ Select Front Animation , and then select an option. Icon Description Movie Recording : Record a movie to display on the front display. Front Animation : Select an animation saved on your camera. Movie : Select a movie saved on your memory card. Photo : Select a photo saved on your memory card. Slide Show : Select photos for your slide show to play on the front display. 3 Touch m “ Children Sound , and then select an option. 4 Align your subject in the frame, and then half-press [ Shutter ] to focus. 5 Press [ Shutter ] to capture the photo. Recording a movie for playing on the front display 1 On the Home screen, touch . 2 Touch m “ Select Front Animation “ Movie Recording “ o . 3 Press [ Shutter ] or touch to start recording. 4 Press [ Shutter ] again or touch , and then touch Yes to play back the movie on the front display. • You can download animations from the Samsung website or transfer them from Intelli-studio. (p. 102) Visit www.samsung.com for more information. • You can record videos of up to 30 seconds in length for playback on the front display. Extended functions 46 Capturing photos with the front display Using the Jump Shot mode Capture a photo of people jumping. An icon will appear on the front display to tell your subjects when to jump. 1 On the Home screen, touch . 2 Press [ Shutter ]. • The front display will start a countdown a few seconds before shooting. 3 Jump when the jump icon appears on the front display. • The camera will capture 3 photos in succession. • If you are capturing photos using the jump shot timer in low light conditions or indoors, photos may appear dark. • In Jump Shot mode, the front display will activate and the touch screen will lock. To unlock the touch screen, touch and hold until reaches . Extended functions 47 Using the Magic Frame shot mode In Magic Frame shot mode, you can apply various frame effects to your photos. The shape and the feel of the photos will change according to the frame you select. 1 On the Home screen, touch . 2 Select a desired frame. 3 Align your subject in the frame, and then half-press [ Shutter ] to focus. 4 Press [ Shutter ] to capture the photo. In Magic Frame shot mode, the resolution is automatically set to . Using the Photo Filter mode In Photo Filter mode, you can apply various filter effects to your photos. Miniature Vignetting Fish-eye Sketch 1 On the Home screen, touch . 2 Touch a desired filter. • To view the original photo, touch Before . • To view the photo with the filter effect, touch After . Using effect modes Capture photos or record videos with various effects. Extended functions 48 Using effect modes Option Description Fish-eye Distort close objects to imitate the visual effect of a fisheye lens. Defog Make a photo clearer. Classic Apply a black and white effect. Retro Apply a sepia tone effect. Negative Apply a negative film effect. 3 Align your subject in the frame, and then half-press [ Shutter ] to focus. 4 Press [ Shutter ] to capture the photo. • To apply filter effects to saved photos, touch . • When you select Sketch , the resolution will change to and below. Before After Option Description Miniature Apply a tilt-shift effect to make the subject appear in miniature. Vignetting Apply the retro-looking colors, high contrast, and strong vignette effect of Lomo cameras. Soft-Focus Hide facial imperfections or apply dreamy effects. Old Film 1 Apply a vintage film effect 1. Old Film 2 Apply a vintage film effect 2. Half Tone Dot Apply a halftone effect. Sketch Apply a pen sketch effect. Extended functions 49 Using effect modes Using the Movie Filter mode In Movie Filter mode, you can record videos with various filter effects. 1 On the Home screen, touch . 2 Touch a desired filter. Option Description Miniature Apply a tilt-shift effect to make the subject appear in miniature. Vignetting Apply the retro-looking colors, high contrast, and strong vignette effect of Lomo cameras. Half Tone Dot Apply a halftone effect. Sketch Apply a pen sketch effect. Option Description Fish-eye Distort close objects to imitate the visual effect of a fisheye lens. Defog Make a video clearer. Classic Apply a black and white effect. Retro Apply a sepia tone effect. Negative Apply a negative film effect. 3 Press [ Shutter ] or touch to start recording. 4 Press [ Shutter ] again or touch to stop recording. • If you select Miniature , the speed of the video will increase. • If you select Miniature , the camera will not record sound. • If you select Miniature , Vignetting , Half Tone Dot , Sketch , Fish-eye , or Defog , the recording speed will be set to and the recording resolution will be set to less than . Extended functions 50 Using effect modes Using the Vignetting mode In Vignetting mode, you can capture a photo or record a video with a vignetting effect. 1 On the Home screen, touch . 2 Select (photo) or (movie). 3 Drag the sliders or touch the sample photos to adjust Level , Brightness , and Contrast . • To view the original photo, touch Before . • To view the photo with the vignetting effect, touch After . Level Before After Brightness Contrast 4 Align your subject in the frame, and then half-press [ Shutter ] to focus. 5 Press [ Shutter ] to capture the photo. To apply the vignetting effect to saved photos, touch . Extended functions 51 Using effect modes Using the Palette Effect mode In Palette Effect mode, you can record a video with effects to make specific colors stand out. 1 On the Home screen, touch . 2 Touch a desired palette. Option Description Palette Effect 1 Create a vivid look with sharp contrast and red color. Palette Effect 2 Make scenes clean and clear by applying a soft blue tone. Palette Effect 3 Apply a soft brown tone. Palette Effect 4 Create a cold and monotone effect. 3 Press [ Shutter ] or touch to start recording. 4 Press [ Shutter ] again or touch to stop recording. Extended functions 52 Recording a voice memo 1 On the Home screen, touch . 2 Press [ Shutter ] or touch to start recording. • Touch to pause and to resume. • Each memo can be up to 10 hours long if memory is available. 3 Press [ Shutter ] again or touch to stop recording. To view the list of saved voice memos, touch . Recording voice memos Learn how to record a voice memo that you can play back later. You can also add a voice memo to a photo to remind you of shooting conditions, time of day, circumstances, etc. You will get the best sound quality when you speak 16 in (40 cm) from the camera. Extended functions 53 Recording voice memos Adding a voice memo to a photo In Program mode, you can add a voice memo to a captured photo. 1 On the Home screen, touch . 2 Touch m , and then touch the setting button next to Memo . 3 Align your subject in the frame, and then capture a photo. • The camera begins to record a voice memo right after you capture the photo. 4 Record a short voice memo (10 seconds maximum). • Press [ Shutter ] to stop recording a voice memo before the 10 seconds are up. You cannot add voice memos to photos in the burst mode. Selecting a resolution and quality ………… 55 Selecting a resolution …………………… 55 Selecting image quality …………………… 56 Using the timer ……………………………… 58 Shooting in the dark ……………………… 59 Preventing red-eye ……………………… 59 Using the flash …………………………… 59 Adjusting the ISO sensitivity ……………… 61 Changing the camera’s focus …………… 62 Using macro ……………………………… 62 Using smart touch focus ………………… 63 Using one touch shooting ………………… 64 Adjusting the focus area ………………… 64 Using face detection ……………………… 65 Detecting faces …………………………… 65 Capturing a smile shot …………………… 66 Detecting eye blinking …………………… 66 Using Smart Face Recognition …………… 67 Registering faces as your favorites (My Star) ………………………………… 68 Adjusting brightness and color …………… 69 Adjusting the exposure manually (EV) …… 69 Changing the metering option …………… 70 Selecting a light source (White balance) … 71 Using burst modes ………………………… 73 Applying effects/Adjusting images ……… 74 Applying Smart Filter effects ……………… 74 Adjusting your photos …………………… 77 Decreasing the sound of the zoom when recording a video …………………………… 78 Available shooting options by shooting mode ……………………………… 79 Shooting options Learn how to set the options in Shooting mode. Shooting options 55 Selecting a resolution and quality Learn how to change the image resolution and quality settings. Icon Description 4608 X 3456 : Print on A1 paper (23.4 X 33.1 inches). 4608 X 3072 : Print on A1 paper in wide ratio (3:2). 4608 X 2592 : Print on A1 paper in panorama ratio (16:9) or play back on an HDTV. 3648 X 2736 : Print on A2 paper (16.5 X 23.4 inches). 2592 X 1944 : Print on A4 paper (8.3 X 11.7 inches). 1984 X 1488 : Print on A5 paper (5.8 X 8.3 inches). 1920 X 1080 : Print on A5 paper in panorama ratio (16:9) or play back on an HDTV. 1024 X 768 : Attach to an email. Selecting a resolution As you increase the resolution, your photo or video will include more pixels, so it can be printed on larger paper or displayed on a larger screen. When you use a high resolution, the file size will also increase. Setting a photo resolution 1 In Shooting mode, touch m “ Photo Size . 2 Select an option, and then touch o . 4608 X 3072 4608 X 2592 3648 X 2736 Photo Size Shooting options 56 Selecting a resolution and quality Setting the video resolution 1 In Shooting mode, touch m “ Movie Size . 2 Select an option, and then touch o . 1280 X 720 HQ 1280 X 720 640 X 480 Movie Size Icon Description 1280 X 720 HQ : Play back high-quality files on an HDTV. 1280 X 720 : Play back on an HDTV. 640 X 480 : Play back on an analog TV. 320 X 240 : Post on a web page. 220 X 176 : Play on the front display in Children mode. When you play videos on a computer, the resolution may change depending on the player you use. Selecting image quality Set the photo and video quality settings. Higher image quality settings will result in larger file sizes. Setting the photo quality The camera compresses and saves the photos you capture in the JPEG format. 1 In Shooting mode, touch m “ Quality . 2 Select an option, and then touch o . Super Fine Fine Normal Quality Icon Description Super Fine : Capture photos in super high quality. Fine : Capture photos in high quality. Normal : Capture photos in normal quality. Shooting options 57 Selecting a resolution and quality Setting the video quality The camera compresses and saves the videos you record in the MP4 (H.264) format. 1 In Shooting mode, touch m “ Frame Rate . 2 Select an option, and then touch o . • As the frame rate increases, action appears more natural, but the file size also increases. 30 FPS 15 FPS Frame Rate Icon Description 30 FPS : Record 30 frames per second. 15 FPS : Record 15 frames per second. Shooting options 58 Using the timer Learn how to set the timer to delay shooting. 3 Press [ Shutter ] to start the timer. • The AF-assist light/timer lamp blinks. The camera will automatically capture a photo at the specified time. • The front display will start a countdown before shooting. • Press [ Shutter ] to cancel the timer. • Depending on the Face Detection option you have selected, the timer function or some of its options may not be available. • Timer options are not available if you set burst options. 1 In Shooting mode, touch m “ Timer . 2 Select an option, and then touch o . Off 10 Sec 2 Sec Timer Icon Description Off : The timer is not active. 10 Sec : Capture a photo after a 10-second delay. 2 Sec : Capture a photo after a 2-second delay. Available options may differ depending on the shooting mode. Shooting options 59 Shooting in the dark Learn how to capture photos at night or in low light conditions. Using the flash Use the flash when you capture photos in the dark or when you need more light in your photos. 1 In Shooting mode, touch m “ Flash . 2 Select an option, and then touch o . Off Auto Red-eye Fill in Flash Icon Description Off : • The flash will not fire. • The camera will display the shake warning when you are shooting in low light. Auto : The flash will fire automatically when the subject or background is dark. Preventing red-eye If the flash fires when you capture a photo of a person in the dark, a red glow may appear in the person’s eyes. To prevent this, select Red-eye or Red-eye Fix . Refer to flash options in “Using the flash.” This option is available in Program, Beauty Shot, Self-Shot, Children, Pose Guide and Night Shot modes. Shooting options 60 Shooting in the dark • Flash options are not available if you set burst options or select Blink Detection . • Make sure that your subjects are within the recommended distance from the flash. (p. 129) • If light from the flash is reflected or there is a substantial amount of dust in the air, tiny spots may appear in your photo. Icon Description Red-eye : • The flash will fire twice when the subject or background is dark to reduce the red-eye effect. • There is an interval between 2 bursts of the flash. Do not move until the flash fires a second time. Fill in : • The flash always fires. • The camera automatically adjusts light intensity. Slow Sync : • The flash fires and the shutter stays open longer. • This option is recommended when you want to capture ambient light to reveal more details in the background. • Use a tripod to prevent your photos from blurring. • The camera will display the shake warning when you are shooting in low light. Red-eye Fix : • The flash fires twice when the subject or background is dark, and the camera corrects red-eyes through its advanced software analysis. • There is an interval between 2 bursts of the flash. Do not move until the flash fires a second time. Available options may differ depending on the shooting mode. Shooting options 61 Shooting in the dark Adjusting the ISO sensitivity The ISO sensitivity is the measure of a film’s sensitivity to light as defined by the International Organization for Standardization (ISO). The higher ISO sensitivity you select, the more sensitive to light your camera becomes. With a higher ISO sensitivity, you can get a better photo without using the flash. 1 In Shooting mode, touch m “ ISO . 2 Select an option, and then touch o . • Select Auto to have the camera select an appropriate ISO sensitivity automatically based on the brightness of the subject and lighting. ISO 80 ISO 100 ISO 200 ISO Higher ISO sensitivities may result in more image noise. Shooting options 62 Changing the camera’s focus Learn how to adjust the camera’s focus to suit the subject and the shooting conditions. 1 In Shooting mode, touch m “ Focus . 2 Select Macro , and then touch o . Normal (AF) Macro Focus Icon Description Normal (AF) : Focus on a subject farther than 32 in (80 cm). Macro : Manually focus on a subject that is 2-32 in (5-80 cm) from the camera (39-59 in / 100-150 cm when you use the zoom). Using macro Use macro to capture close-up photos of subjects, such as flowers or insects. • Try to hold the camera firmly to prevent blurry photos. • Turn off the flash if the distance to the subject is less than 16 in (40 cm). Shooting options 63 Changing the camera’s focus • If you do not touch any area on the screen, the focus frame will appear in the center of the screen. • Tracking a subject may fail when: - the subject is too small - the subject moves excessively - the subject is backlit or you are shooting in a dark place - colors or patterns on the subject and the background are the same - the subject includes horizontal patterns, such as blinds - the camera shakes excessively • When tracking a subject fails, the focus frame will appear as a white single-line frame ( ). • If the camera fails to track the subject, you must reselect the subject to track. • If the camera fails to focus, the focus frame will change to a red single- line frame ( ). • If you use this function, you cannot set self timer options, Face Detection options, Smart Filter options, and burst options. Using smart touch focus Smart Touch AF allows you to track and auto focus on your subject, even when you are moving. 1 In Shooting mode, touch m “ Focus Area . 2 Select Smart Touch AF , and then touch o . 3 Touch the subject you want to track in the touch area. • The white frame means that your camera is tracking the subject. • The green frame means that your subject is in focus when you half-press [ Shutter ]. Shooting options 64 Changing the camera’s focus Adjusting the focus area You can get clearer photos by selecting an appropriate focus area according to your subject’s location in the scene. 1 In Shooting mode, touch m “ Focus Area . 2 Select an option, and then touch o . Center AF Multi AF One Touch Shooting Smart Touch AF Focus Area Icon Description Center AF : Focus on the center of the frame (suitable when subjects are located at or near the center). Multi AF : Focus on one or more of 9 possible areas. One Touch Shooting : Focus on the subject and capture a photo by touching the image on the screen. (p. 64) Smart Touch AF : Focus on and track the subject that you touch on the screen. (p. 63) Using one touch shooting You can focus on a subject and capture a photo with the touch of your finger. 1 In Shooting mode, touch m “ Focus Area . 2 Select One Touch Shooting , and then touch o . 3 Touch a subject to capture the photo. If you use this function, you cannot set self timer options, burst options, and Smart Filter options. Shooting options 65 Using face detection If you use Face Detection options, your camera can automatically detect a human face. When you focus on a human face, the camera adjusts the exposure automatically. Use Blink Detection to detect closed eyes or Smile Shot to capture a smiling face. You can also use Smart Face Recognition to register faces and prioritize the focus on them. Detecting faces Your camera automatically detects up to 10 human faces in one scene. 1 In Shooting mode, touch m “ Face Detection . 2 Select Normal , and then touch o . The nearest face appears in a white focus frame and the rest of the faces appear in gray focus frames. • The closer you are to the subjects, the quicker your camera will detect faces. • To focus on a subject in a gray focus frame, touch the face in the frame. • The camera may not register detected faces if you set burst options such as Continuous , Motion Capture , and AEB . • When your camera detects a face, it tracks the detected face automatically. • Face Detection may not be effective when: - the subject is far from the camera (The focus frame will appear orange for Smile Shot and Blink Detection.) - it is too bright or too dark - the subject is not facing the camera - the subject is wearing sunglasses or a mask - the subject’s facial expression changes drastically - the subject is backlit or the lighting conditions are unstable • Face Detection is not available when you set Smart Filter effects or Smart Touch AF. • Depending on shooting options, available Face Detection options may differ. • Depending on the Face Detection options you selected, the timer function may not be available or available timer options may differ. • When you set Face Detection options, some burst options are not available. • When you capture photos of detected faces, they will be registered in the face list. • You can view registered faces in order of priority in Playback mode. (p. 84) Even though faces are registered successfully, they may not be classified in Playback mode. • A face detected in Shooting mode may not appear in the face list or Smart Album. Shooting options 66 Using face detection Detecting eye blinking If your camera detects closed eyes, it will automatically capture 2 photos in succession. 1 In Shooting mode, touch m “ Face Detection . 2 Select Blink Detection , and then touch o . • Hold your camera still while “ Capturing ” is displayed on the screen. • If Blink Detection fails, the “ Picture taken with eyes closed. ” message appears. Capture another photo. Capturing a smile shot The camera automatically releases the shutter when it detects a smiling face. 1 In Shooting mode, touch m “ Face Detection . 2 Select Smile Shot , and then touch o . 3 Compose your shot. • The camera automatically releases the shutter when it detects a smiling face. When your subject smiles broadly, your camera can detect the smile more easily. Shooting options 67 Using face detection • The camera may recognize and register faces incorrectly depending on lighting conditions, drastic changes in the subject's pose or face, and whether or not the subject is wearing glasses. • The camera can automatically register up to 14 faces. If the camera recognizes a new face when 14 faces have already been registered, it will replace the lowest priority face with the new one. • The camera can detect up to 5 favorite faces in one scene. Using Smart Face Recognition The camera automatically registers faces that you frequently photograph. The Smart Face Recognition feature will automatically prioritize the focus on those faces and on favorite faces. The Smart Face Recognition feature is available only when you use a memory card. 1 In Shooting mode, touch m “ Face Detection . 2 Select Smart Face Recognition , and then touch o . The nearest face appears in a white focus frame and the rest of the faces appear in gray focus frames. • : Faces that you have registered as favorites have a star on the bottom left of the frame. (To register faces as favorites, refer to page 68.) • : Faces that the camera automatically registered have a dot on the bottom right of the frame. Shooting options 68 Using face detection 4 Touch when the face list appears. • Your favorite faces are indicated with a on the face list. • You can register up to 6 favorite faces. • The flash will not fire when you register a favorite face. • If you register the same face twice, you can delete one of the faces in the face list. Viewing your favorite faces 1 In Shooting mode, touch m “ Smart FR Edit . 2 Select Face List Edit . • To change the ranking of your favorite faces, touch . (p. 84) • To delete a favorite face, touch . Registering faces as your favorites (My Star) You can register your favorite faces to prioritize the focus and exposure on those faces. This feature is available only when you use a memory card. 1 In Shooting mode, touch m “ Smart FR Edit . 2 Select My Star . 3 Align your subject’s face with the oval guideline, and then press [ Shutter ] to register the face. • If the subject’s face is not aligned with the oval guideline, the white frame will not appear. • Capture photos of one person at a time when registering faces. • Capture 5 photos the subject’s face for best results: one each from the front, left, right, above, and below. • When capturing photos from the left, right, above, and below, instruct the subject not to turn his or her face more than 30 degrees. • You can register a face even if you capture one photo of the subject's face. Shooting options 69 Adjusting brightness and color Learn how to adjust the brightness and color for better image quality. • Once you adjust the exposure, the setting will be stored automatically. You may need to change the exposure value later to avoid overexposure or underexposure. • If you cannot decide on an appropriate exposure, select AEB (Auto Exposure Bracket). The camera will capture 3 consecutive photos, each with a different exposure: normal, underexposed, and overexposed. (p. 73) Adjusting the exposure manually (EV) Depending on the intensity of the ambient light, your photos may be too bright or dark. In these cases, you can adjust the exposure to get a better photo. Darker (-) Neutral (0) Brighter (+) 1 In Shooting mode, touch m “ EV . 2 Select a desired value, and then touch o . • The photo will be brighter as exposure increases. • When you adjust the exposure value, the icon will appear as shown below. Shooting options 70 Adjusting brightness and color Icon Description Multi : • Your camera divides the frame into several areas, and then measures the light intensity of each area. • Suitable for general photos. Spot : • Your camera measures only the light intensity of the very center of the frame. • If a subject is not in the center of the frame, your photo may be improperly exposed. • Suitable for a subject with backlighting. Center-weighted : • Your camera averages the meter reading of the entire frame with emphasis placed on the center. • Suitable for photos with subjects in the center of the frame. Changing the metering option The metering mode refers to the way in which a camera measures the quantity of light. The brightness and lighting of your photos will vary depending on the metering mode you select. 1 In Shooting mode, touch m “ Metering . 2 Select an option, and then touch o . Multi Spot Center-weighted Metering Shooting options 71 Adjusting brightness and color Selecting a light source (White balance) The color of your photo depends on the type and quality of the light source. If you want the color of your photo to be realistic, select a white balance setting that adjusts the camera appropriately to the lighting conditions. For example, if you are shooting indoors under incandescent bulbs, select Tungsten. Auto WB Daylight Cloudy Tungsten 1 In Shooting mode, touch m “ White Balance . 2 Select an option, and then touch o . White Balance Auto WB Daylight Cloudy Fluorescent_H Icon Description Auto WB : Automatically set the White Balance based on the lighting conditions. Daylight : For outdoor photos on a sunny day. Cloudy : For outdoor photos on a cloudy day or in shadows. Fluorescent_H : For shooting under a daylight fluorescent or 3-way fluorescent light. Fluorescent_L : For shooting under white fluorescent light. Tungsten : For shooting indoor photos under incandescent bulbs or halogen lamps. Custom Set : Use White Balance settings that you defined. Shooting options 72 Adjusting brightness and color Defining your own White Balance You can customize the White Balance by capturing a photo of a white surface, such as a piece of paper, under the lighting conditions in which you intend to capture a photo. The White Balance feature will help you reproduce the colors you see in the scene accurately in your photo. 1 In Shooting mode, touch m “ White Balance . 2 Select Custom Set , and then touch o . 3 Aim the lens at a piece of white paper, and then press [ Shutter ]. Shooting options 73 Using burst modes It can be difficult to capture photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos. In these cases, select one of the burst modes to rapidly capture multiple photos. Icon Description Single : Capture a single photo. Continuous : • While you are pressing [ Shutter ], the camera continuously captures photos. • The maximum number of photos depends on the capacity of your memory card. Motion Capture : While you are pressing [ Shutter ], the camera captures VGA photos (6 photos per second; maximum of 30 photos). AEB : • Captures 3 consecutive photos, each with a different exposure: normal, underexposed, and overexposed. • Use a tripod to prevent blurry photos. • You can use the flash, timer, and Smart Filter only when you select Single . • When you select Motion Capture , your camera will set the resolution to VGA and set the ISO sensitivity to Auto . • Depending on the Face Detection option you selected, some burst options may not be available. 1 In Shooting mode, touch m “ Drive . 2 Select an option, and then touch o . Single Continuous Motion Capture AEB Drive Shooting options 74 Applying effects/Adjusting images Available filters in Program mode Icon Description Off : No effect Miniature : Apply a tilt-shift effect to make the subject appear in miniature. Vignetting : Apply the retro-looking colors, high contrast, and strong vignette effect of Lomo cameras. Soft-Focus : Hide facial imperfections or apply dreamy effects. Old Film 1 : Apply vintage film effect 1. Old Film 2 : Apply vintage film effect 2. Half Tone Dot : Apply a halftone effect. Sketch : Apply a pen sketch effect. Fish-eye : Distort objects to imitate the visual effect of a fisheye lens. Defog : Make a photo clearer. Classic : Apply a black and white effect. Applying Smart Filter effects Apply various filter effects to your photos and videos to create unique images. Miniature Vignetting Fish-eye Sketch 1 In Shooting mode, touch m “ Smart Filter . 2 Select a filter, and then touch o . Shooting options 75 Applying effects/Adjusting images Icon Description Retro : Apply a sepia tone effect. Negative : Apply a negative film effect. Custom RGB : Customize a color value. Available filters in Movie mode Icon Description Off : No effect Miniature : Apply a tilt-shift effect to make the subject appear in miniature. Vignetting : Apply the retro-looking colors, high contrast, and strong vignette effect of Lomo cameras. Half Tone Dot : Apply a halftone effect. Sketch : Apply a pen sketch effect. Fish-eye : Distort close objects to imitate the visual effect of a fisheye lens. Defog : Make an image clearer. Classic : Apply a black and white effect. Icon Description Retro : Apply a sepia tone effect. Negative : Apply a negative film effect. Custom RGB : Customize a color value. Shooting options 76 Applying effects/Adjusting images Defining your own RGB tone 1 In Shooting mode, touch m → Smart Filter . 2 Select Custom RGB , and then touch o . 3 Drag up or down to adjust the values of each color. • The higher the value, the brighter the photo. • The lower the value, the darker the photo. Custom RGB 4 Touch o to save your changes. • If you select Miniature when you are recording a video, the speed of the video will increase. • If you select Miniature when you are recording a video, the camera will not record sound. • If you select Miniature , Vignetting , Half Tone Dot , Sketch , Fish- eye , or Defog while recording a video, the recording speed will be set to and the recording resolution will be set to less than . • If you set Smart Filter effects, you cannot use the Face Recognition options, burst options, Image Adjustment options, Intelli zoom or Smart Touch AF. • If you select Sketch when you capture a photo, the photo resolution will change to or below. Shooting options 77 Applying effects/Adjusting images Adjusting your photos Adjust the sharpness, color saturation, or contrast of your photos. 1 In Shooting mode, touch m “ Image Adjust . 2 Drag up or down to adjust each value. • : Sharpness • : Contrast • : Saturation Image Adjust 3 Touch o to save your changes. Sharpness Description - Soften the edges on your photos (suitable for editing the photos on your computer). + Sharpen the edges to improve the clarity of your photos. This may also increase the noise on your photos. Contrast Description - Decrease the color and brightness. + Increase the color and brightness. Saturation Description - Decrease the saturation. + Increase the saturation. • Select 0 if you do not want to apply any effects (suitable for printing). • If you set Adjustment functions, you cannot use Smart Filter options. Shooting options 78 Decreasing the sound of the zoom when recording a video When you use the zoom while recording videos, the camera can record the sound of the zoom motor in the videos. Use the Sound Alive function to reduce the zoom noise. 1 In Shooting mode, touch m “ Voice . 2 Select an option, and then touch o . Sound Alive On Sound Alive Off Mute Voice Icon Description Sound Alive On : Turn on the Sound Alive function. Sound Alive Off : Turn off the Sound Alive function. Mute : Do not record sounds. • Do not block the microphone when you use the Sound Alive function. • Recordings made with Sound Alive may differ from actual sounds. Shooting options 79 Available shooting options by shooting mode For details about shooting options, refer to "Shooting options". Smart Auto Simple Shot Scene Close-up Shot Night Shot Beauty Shot Program DUAL IS Pose Guide Movie Resolution O O O O O O O O O O Quality - O O O O O O O O O Timer U O O O O O O O - U Flash U U - - U U O - U - ISO sensitivity - - - - - - O - - - Macro - - - - - - O - - O Focus area - - - - - - O - - - Face detection U - U - - U O - U - EV - - - - - - O - - O Metering - - - - - - O - - O White balance - - - - - - O - - O Drive - - - - - - O - - - Smart filter - - - - - - O - - U Image adjust - - - - - - O - O - Sound Alive - - - - - - - - - O Digital zoom - - U - - - O - - - Intelli zoom - - U - - - O - - - OIS U U U U U U O U U O Voice memo - - - - - - O - - - U In these modes, some options are limited or a certain option is set by default. O The option is available in this mode. Shooting options 80 Available shooting options by shooting mode Smart Movie Self-Shot Children Jump Shot Magic Frame shot Photo Filter Movie Filter Vignetting (photo) Vignetting (movie) Palette Effect Shot Resolution O O O O - O U O U O Quality O O O O O O O O O O Timer U O - - O O U O U U Flash - O U - U U - U - - ISO sensitivity - O - - - - - - - - Macro - O - - - - - - - - Focus Area - - U - - - - - - - Face detection - U O - - - - - - - EV U O U O U U U U U - Metering - - - O - - - - - - White balance - O - O - - - - - - Drive - - U - - - - - - - Smart filter - - - - - O U - - O Image adjust - O - - - - - - - - Sound Alive O - - - - - O - O O Digital zoom - - - - - - - - - - Intelli zoom - - - - - - - - - - OIS U O O U U U U U U U Voice memo - O - - - - - - - - U In these modes, some options are limited or a certain option is set by default. O The option is available in this mode. Viewing photos or videos in Playback mode …………………………… 82 Starting Playback mode ………………… 82 Viewing photos …………………………… 89 Playing a video …………………………… 91 Playing a voice memo …………………… 92 Editing a photo ……………………………… 94 Resizing photos …………………………… 94 Rotating a photo ………………………… 95 Applying Smart Filter effects ……………… 95 Adjusting your photos …………………… 96 Creating a print order (DPOF) …………… 97 Viewing files on a TV or HDTV …………… 98 Transferring files to your Windows computer ………………………………… 100 Transferring files with Intelli-studio ……… 101 Transferring files by connecting the camera as a removable disk …………… 103 Disconnecting the camera (for Windows XP) ……………………… 104 Transferring files to your Mac computer 105 Printing photos with a PictBridge photo printer ……………………………… 106 Playback/Editing Learn how to play back photos, videos, or voice memos and edit photos or videos. Also, learn how to connect your camera to your computer, photo printer, TV or HDTV. Playback/Editing 82 Viewing photos or videos in Playback mode Learn how to play back photos, videos, or voice memos and how to manage files. 2 Drag the image left or right to move to another file. • To skip files quickly, tilt the camera in the direction you want to flip files. (p. 83) • You can also touch and hold the left end or right end of the screen to skip files quickly. • You can also drag the slider left or right to move to the previous or next file. Starting Playback mode View photos or play videos and voice memos stored in your camera. 1 Press [ Playback ]. • The most recent file will be displayed. • If the camera is off, it will turn on and display the most recent file. • Press the front LCD button to play back photos on the front display. To view files by category, touch on the Home screen. (p. 85) Playback/Editing 83 Viewing photos or videos in Playback mode • Motion recognition may not work well if you hold the camera with the screen parallel to the ground. • When you rotate the camera 90° or 180° while you view a photo, the camera will automatically change the orientation of the displayed photo. (p. 113) • To deactivate motion recognition, in Playback mode, touch m , and then touch the setting button next to Gesture View . • If you want to view files stored in the internal memory, remove your memory card. • The camera will not properly play back files of unsupported sizes or files that were captured with other cameras. Viewing files with motion recognition You can view files by tilting the camera in Playback mode. Playback/Editing 84 Viewing photos or videos in Playback mode Ranking your favorite faces You can rank your favorite faces or delete them. The favorite face feature is available only when you insert a memory card into the camera. 1 In Playback mode, touch m “ Face List . • In Thumbnail view or Smart album, touch m “ Face List . Face List Display in Playback mode File Information File Location Icon Description Photo includes a voice memo Play videos (p. 91) or voice memos (p. 92) Folder name – File name Video length Protected file Print order has been set (DPOF) Delete files (p. 88) Play a slide show (p. 90) View files as thumbnails (p. 86) To display file information on the screen, touch m “ File Information “ an option “ o . You can select the information to appear either on the front display or the touch screen. Playback/Editing 85 Viewing photos or videos in Playback mode Viewing files in Smart album as thumbnails View files by category, such as date, face, or file type. 1 On the Home screen, touch . 2 Touch “ a category option. Icon Description View all files. View files by the date they were saved. View files by recognized faces and favorite faces. View files by the file type. • It may take some time for the camera to open Smart album, change the category, or reorganize files. • If you delete a category, all files in the category will be deleted. • The front display may not activate after you access Smart Album. 2 To change the rank of a face, touch “ Yes , and then drag the face to a new location. Edit Ranking 3 Touch o to save your changes. • To delete a face from the list, touch , touch the face, and then touch o . Touch to view only your favorite faces in the face list. Playback/Editing 86 Viewing photos or videos in Playback mode Viewing files with the page flip effect You can flip through files by dragging or flicking the touch pen across the screen. You can also run a slide show with the flip page effect by touching the slide show icon on the left side. 1 On the Home screen, touch . 2 Touch a theme. 3 Drag images to the left or right to move to the previous or next file. Icon Description Play a slide show. • Touch the screen to pause the slide show and adjust the volume or mute the sound. • Touch to stop the slide show. Return to the theme selection screen. You can view only photos when you use the page flip effect. Viewing files as thumbnails Scan thumbnails of files. In Playback mode, rotate [ Zoom ] to the left to view thumbnails (9 at a time). Rotate [ Zoom ] to the left once or twice more to display more thumbnails (16 or 36 at a time). Rotate [ Zoom ] to the right to return to the previous view. Playback/Editing 87 Viewing photos or videos in Playback mode Protecting files Protect your files to prevent accidental deletion. 1 In Playback mode, locate the file you want to protect, and then touch m . 2 Touch the setting button next to Protect . Delete Start Slide Show Protect Resize You cannot delete or rotate a protected file. Touch a file to display it in full screen view. Icon Description Delete files Photo includes a voice memo Video file Voice memo file Drag the screen up or down to move to the previous or next page of thumbnails. Playback/Editing 88 Viewing photos or videos in Playback mode Deleting all files You can select all files, and then delete them at once. 1 In Playback mode, touch m → Delete . • In Thumbnail view or Smart album, touch m → Delete . 2 Select All , and then touch o . 3 When the pop-up message appears, touch Yes . Copying files to a memory card Copy files from the internal memory to a memory card. 1 In Playback mode, touch m → Copy to Card . • In Thumbnail view or Smart album, touch m → Copy to Card . 2 When the pop-up message appears, touch Yes . Deleting files Select files to delete in Playback mode. Deleting a single file You can select one file, and then delete it. 1 In Playback mode, locate the file you want to delete, and then touch . 2 When the pop-up message appears, touch Yes . You can also delete a file by touching m → Delete → Delete → o → Yes . Deleting multiple files You can select multiple files, and then delete them together. 1 In Thumbnail view or Smart album, touch . • You can also touch m → Delete → Select → o . 2 Select the files you want to delete, and then touch . 3 When the pop-up message appears, touch Yes . If you delete a category, all files in the category will be deleted. Playback/Editing 89 Viewing photos or videos in Playback mode Icon Description Delete the file. Crop the photo (the camera will save it as a new file). Return to the original view. Zoom ratio (The maximum zoom ratio differs depending on the photo resolution.) When you view photos that were captured by another camera, the zoom ratio may differ. Viewing photos Enlarge part of a photo or view photos as a slide show. Enlarging a photo In Playback mode, rotate [ Zoom ] to the right to enlarge a portion of the photo. Rotate [ Zoom ] to the left to zoom out. Drag the screen to see another part of the photo. Playback/Editing 90 Viewing photos or videos in Playback mode Playing a slide show Apply effects and audio to a slide show of your photos. The slide show function does not work for videos or voice memos. 1 On the Home screen, touch . 2 Touch , and then select photos that you want to include in the slide show. • Touch to select all. • Touch to cancel all your selections. • You cannot select video files. • You can select up to 2,000 files. 3 Touch o . 4 Touch m , and then set a slide show effect. All Play Icon Description Play Mode : Set whether or not to repeat the slide show. ( One Play *, Repeat ) Interval : • Set the interval between photos. ( 1 sec *, 3 sec , 5 sec , 10 sec ) • You must set the Effect option to Off to set the interval. Music : Set background audio. ( Off , Mist *, Drops , Muse , Trip , Fall ) Effect : • Set a scene change effect between photos. ( Off , Calm *, Shine , Relax , Lively , Sweet ) • Select Off to cancel effects. • When you use the Effect option, the interval between photos will be set to 1 second. 5 Touch to start the slide show. • Touch the screen to pause the slide show. • Touch to adjust the volume or mute the sound. • Touch to stop the slide show. * Default Playback/Editing 91 Viewing photos or videos in Playback mode Trimming a video 1 While viewing a video, touch at the point where you want the trimming to begin. 2 Touch “ . 3 Touch at the point where you want the trimming to end. • You can also adjust the scene to be cropped by dragging the handles that appear on the progress bar. 4 Touch . 5 When the pop-up message appears, touch Yes . • The original video should be at least 10 seconds long. • The camera will save the edited video as a new file. Playing a video In Playback mode, you can view a video, and then capture or trim parts of the playing video. You can save the captured or trimmed segments as new files. 1 In Playback mode, locate a video, and then touch . 2 View the video. Icon Description Scan backward. / Pause or resume playback. Scan forward. Adjust the volume or mute the sound. Return to Playback mode. Playback/Editing 92 Viewing photos or videos in Playback mode Playing a voice memo Listening to a voice memo 1 In Playback mode, locate a voice memo file, and then touch . 2 Listen to the voice memo. Icon Description Scan backward. / Pause or resume playback. Scan forward. Adjust the volume or mute the sound. Return to Playback mode. Capturing an image from video 1 While viewing a video, touch at the point where you want to capture an image. 2 Touch . 3 When the pop-up message appears, touch Yes . • The resolution of the captured image will be the same as the original video. • The captured image is saved as a new file. Playback/Editing 93 Viewing photos or videos in Playback mode Playing voice memos that are attached to photos 1 In Playback mode, locate a photo that includes a voice memo, and then touch . 2 Listen to a voice memo. Icon Description / Pause or resume playback. Adjust the volume or mute the sound. Return to Playback mode. Playback/Editing 94 Editing a photo Learn how to edit photos. • The camera will save edited photos as new files. • When you edit photos, the camera will automatically convert them to a lower resolution. Photos that you rotate or resize manually are not automatically converted to a lower resolution. Rotated photos overwrite the original files. 3 Touch o to save. Available resize options differ depending on the original size of the photo. Resizing photos Change the size of a photo and save it as a new file. You can also select a photo to be displayed when the camera turns on. 1 In Playback mode, locate a photo, and then touch m . 2 Touch Resize , and then select a size option. • Select Start Image to save the photo as a start image. (p. 110) 2688 X 1512 1920 X 1080 Start Image Resize Playback/Editing 95 Editing a photo Rotating a photo 1 In Playback mode, locate a photo, and then touch m . 2 Touch Rotate , and then select a rotate option. Off Right 90˚ Left 90˚ 180˚ Rotate 3 Touch o to save. The camera will overwrite the original file. Applying Smart Filter effects Apply special effects to your photos. 1 On the Home screen, touch . • The most recent file will be displayed. 2 Touch “ a photo. 3 Touch m “ Smart Filter . 4 Select a filter. • To see available filter options, refer to page 74. • To view the original photo, touch Before . • To view the photo with the filter effect, touch After . Before After Miniature 5 Touch V to save your changes. Playback/Editing 96 Editing a photo 4 Drag the sliders or touch the sample photos to adjust the option. • To view the original photo, touch Before . • To view the adjusted photo, touch After . 5 Touch V to save your changes. Retouching faces 1 On the Home screen, touch . • The most recent file will be displayed. 2 Touch “ a photo. 3 Touch m “ Face Retouch . 4 Drag the sliders or touch the sample photos to adjust the skin tone. • As the slider moves to the right, the skin tone becomes brighter. • To view the original photo, touch Before . • To view the adjusted photo, touch After . 5 Touch V to save your changes. Adjusting your photos Learn how to adjust the brightness, contrast, or saturation or how to correct the red-eye effect. The camera will save an edited photo as a new file, but may convert it to a lower resolution. • You can adjust brightness, contrast, and saturation and apply Smart Filter effects at the same time. • You cannot apply the Face Retouch, and Red-eye Fix effects at the same time. Adjusting brightness, contrast, or saturation 1 On the Home screen, touch . • The most recent file will be displayed. 2 Touch “ a photo. 3 Touch m “ an adjusting option. Icon Description Brightness Contrast Saturation Playback/Editing 97 Editing a photo Removing red-eye 1 On the Home screen, touch . • The most recent file will be displayed. 2 Touch “ a photo. 3 Touch m “ Red-eye Fix . • To view the original photo, touch Before . • To view the adjusted photo, touch After . 4 Touch V to save your changes. Creating a print order (DPOF) Select photos to print and save print options in the Digital Print Order Format (DPOF). This information is saved in the MISC folder on your memory card for convenient printing on DPOF- compatible printers. 1 In Playback mode, locate a photo, and then touch m . 2 Touch DPOF . 3 Touch / to select the number of copies, and then touch o . • You can take the memory card to a print shop that supports DPOF (Digital Print Order Format) or you can print photos directly through a DPOF-compatible printer at home. • Photos with dimensions that are wider than the paper may be cut off on the left and right edges. Ensure that your photo dimensions are compatible with the paper you select. • You cannot set DPOF options for photos stored in the internal memory. Playback/Editing 98 Viewing files on a TV or HDTV Play back photos or videos by connecting your camera to a TV with the A/V cable. 7 Turn on your camera. • The camera automatically enters into Playback mode when you connect it to a TV. 8 View photos or play videos using the touch screen on your camera. • Depending on the TV model, you may see some digital noise or part of an image may not appear. • Images may not be centered on the TV screen depending on your TV settings. 1 On the Home screen, touch . 2 Touch Connectivity “ Video Out . 3 Select a video signal output for your country or region. (p. 112) 4 Turn off your camera and TV. 5 Connect your camera to your TV with the A/V cable. Video Audio 6 Turn on your TV, and then select a video output mode with the TV remote control. Playback/Editing 99 Viewing files on a TV or HDTV Viewing files on an HDTV You can view high-quality and uncompressed photos or videos on an HDTV using the optional HDMI cable. HDMI (High Definition Multimedia Interface) is supported by most HDTVs. For details, see the HDMI Kit manual. 1 On the Home screen, touch . 2 Touch Connectivity “ HDMI Size . 3 Select an HDMI resolution. 4 Turn off your camera and HDTV. 5 Connect your camera to your HDTV using an optional HDMI cable. 6 Turn on your camera. • If you have an Anynet+ compatible Samsung HDTV, the HDTV will turn on automatically and display the camera screen. • If you turn Anynet+ off, the HDTV does not turn on automatically. 7 View files using a remote control of your camera or HDTV. • If your HDTV supports the Anynet+(CEC) profile, turn Anynet+ on in the camera’s settings menu (p.111) to control the camera and TV with the TV’s remote control. • Anynet+ lets you control all connected Samsung A/V devices with the TV remote control. • The time it takes for the camera to connect to your HDTV may vary with the type of microSD or microSDHC card you use. A faster microSD or microSDHC card will not necessarily result in a faster HDMI transfer, because the main function of the card is to improve transfer rate during shooting. Playback/Editing 100 Transferring files to your Windows computer Transfer files to your Windows computer, edit them with Intelli-studio, and upload them to the web. • The requirements are recommendation only. Intelli-studio may not work properly even when the computer meets the requirements, depending on the condition of your computer. • If your computer does not meet the requirements, videos may not play correctly or it may take longer to edit videos. • Install DirectX 9.0c or above before you use the program. • Your computer must be running Windows XP, Windows Vista or Windows 7 for you to connect the camera as a removable disk. Samsung is not responsible for any damage that results from using computers that do not meet the requirements or computers you have assembled yourself. Requirements Item Requirements CPU Intel Pentium 4, 3.2 GHz or higher/AMD Athlon™ FX 2.6 GHz or higher RAM Minimum 512 MB RAM (1 GB or more recommended) OS Windows XP SP2, Windows Vista, or Windows 7 (32-bit editions) Hard disk capacity 250 MB or more (1 GB and above recommended) Others • CD-ROM drive • 1024 X 768 pixels, 16-bit color display compatible monitor (1280 X 1024 pixels, 32-bit color display recommended) • USB 2.0 port • nVIDIA Geforce 7600GT or higher/ATI X1600 series or higher • Microsoft DirectX 9.0c or higher * The programs may not work properly on 64-bit editions of Windows XP, Windows Vista, and Windows 7. Playback/Editing 101 Transferring files to your Windows computer 5 Turn on the camera. • The computer recognizes the camera automatically and Intelli- studio launches automatically. If you set the USB option to Select Mode , select Computer in the pop-up window. 6 Select a destination folder on your computer, and then select Yes . • New files stored on the camera will automatically transfer to the selected folder. • If your camera has no new files, the pop-up window for saving new files will not appear. For Windows Vista and Windows 7, select Run iStudio.exe from the Auto Play window to start Intelli-studio. Transferring files with Intelli-studio Intelli-studio will start automatically when you connect the camera to your computer with the USB cable. The battery will charge while the camera is connected to a computer with the USB cable. 1 On the Home screen, touch . 2 Touch Connectivity , and then turn on PC Software by touching the setting button. 3 Turn off the camera. 4 Connect the camera to your computer with the USB cable. You must plug the end of the cable with the indicator light ( S ) into your camera. If the cable is reversed, it may damage your files. The manufacturer is not responsible for any loss of data. Playback/Editing 102 Transferring files to your Windows computer Using Intelli-studio Intelli-studio is a built-in program that allows you to play back and edit files. For details, select Help “ Help from the program toolbar. • To enjoy more features, such as creating slide shows with templates, install the full version of Intelli-studio by selecting Web Support “ Update Intelli-studio “ Start Update from the program toolbar. • You can update the firmware of your camera by selecting Web Support “ Upgrade firmware for the connected device from the program toolbar. • When you launch Intelli-studio with your camera connected to your computer, you can download short animations for use in Children mode. Also, you can use Intelli-studio to edit videos you have captured, and then play them on the front display. • If you install Intelli-studio on your computer, the program will launch more quickly. To install the program, select Tool “ Install Intelli-studio on PC . • You cannot edit files directly on the camera. Transfer files to a folder on your computer before editing. • Intelli-studio supports the following formats: - Videos: MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9), AVI (MJPEG) - Photos: JPG, GIF, BMP, PNG, TIFF • The screenshot below appears differently when you launch Intelli-studio without connecting the camera to your computer. 5 4 3 7 9 0 ! 8 ^ # $ % 1 2 6 @ Playback/Editing 103 Transferring files to your Windows computer No. Description 1 Open menus. 2 Display files in the selected folder. 3 Switch to the Photo edit mode. 4 Switch to the Video edit mode. 5 Switch to the Sharing mode. (to send files by email or upload files to websites, such as Flickr or YouTube) 6 Download short animations for use in Children mode. 7 Enlarge or reduce the thumbnails in the list. 8 Select a file type. 9 View files in the selected folder on your computer. 0 Show or hide files on the connected camera. ! View files in the selected folder on the camera. @ View files as thumbnails or on a map. # Browse folders stored on the camera. $ Browse folders stored on your computer. % Move to the previous or next folder. ^ Print files, view files on a map, store files in My Folder, or register faces. Transferring files by connecting the camera as a removable disk Connect the camera to your Windows computer as a removable disk. 1 On the Home screen, touch . 2 Touch Connectivity , and then turn off PC Software by touching the setting button. 3 Turn off the camera. 4 Connect the camera to your computer with the USB cable. You must plug the end of the cable with the indicator light ( S ) into your camera. If the cable is reversed, it may damage your files. The manufacturer is not responsible for any loss of data. Playback/Editing 104 Transferring files to your Windows computer Disconnecting the camera (for Windows XP) With Windows Vista and Windows 7, the methods for disconnecting the camera are similar. 1 If the status lamp on your camera is blinking, wait until it stops. 2 Click on the tool bar at the bottom right of your computer screen. 3 Click the pop-up message. 4 Click the message box indicating safely removed. 5 Remove the USB cable. The camera may not disconnect safely while Intelli-studio is running. End the program before disconnecting the camera. 5 Turn on the camera. • The computer recognizes the camera automatically. If you set the USB option to Select Mode , select Computer in the pop-up window. 6 On your computer, select My Computer “ Removable Disk “ DCIM “ 100PHOTO . 7 Drag or save files to your computer. Playback/Editing 105 Transferring files to your Mac computer When you connect the camera to a Macintosh computer, the computer will automatically recognize the device. You can transfer files directly from the camera to the computer without installing any programs. Mac OS 10.4 or later is supported. 2 Turn on the camera. • The computer recognizes the camera automatically and displays a removable disk icon. If you set the USB option to Select Mode , select Computer in the pop-up window. 3 Double-click the removable disk icon. 4 Drag or save files to your computer. 1 Connect your camera to a Macintosh computer with the USB cable. You must plug the end of the cable with the indicator light ( S ) into your camera. If the cable is reversed, it may damage your files. The manufacturer is not responsible for any loss of data. Playback/Editing 106 Printing photos with a PictBridge photo printer Print photos with a PictBridge compatible printer by connecting your camera directly to the printer. 7 Touch to print. • Touch to print all photos. 8 When the pop-up window appears, touch Yes to begin printing. • To cancel printing, touch Cancel on the pop-up window. 1 On the Home screen, touch . 2 Touch Connectivity “ USB “ Printer . 3 Turn on the printer, and then connect your camera to the printer with the USB cable. 4 If the camera is off, press [ POWER ] or [ Playback ] to turn it on. • The printer recognizes the camera automatically. 5 Select a file to print. 6 Touch / to select the number of copies. • To set printer options, touch m . (p. 107) Playback/Editing 107 Printing photos with a PictBridge photo printer Configuring print settings To set printing options, touch m . Size Layout Type Quality Icon Description Size : Set the print size. Layout : Set the number of photos to be printed on a single sheet of paper. Type : Set the type of paper. Quality : Set the print quality. Date : Set to print the date. File Name : Set to print the file name. Reset : Reset settings to their default values. Some options may not be supported by some printers. Settings menu ………………………………………… 109 Accessing the settings menu ……………………… 109 Sound ……………………………………………… 110 Display ……………………………………………… 110 Connectivity ………………………………………… 111 General ……………………………………………… 112 Settings Refer to options to configure your camera’s settings. Settings 109 Settings menu Learn to configure your camera's settings. 3 Touch an item. Language Time Zone Date/Time Set Date Type General English Home Off 4 Select an option, and then touch o . Date Type YYYY/MM/DD MM/DD/YYYY DD/MM/YYYY Off 5 Touch to return to the previous screen. Accessing the settings menu 1 On the Home screen, touch . 2 Touch a menu. Settings Sound Display Connectivity General Icon Description Sound : Set various camera sounds and the volume. (p. 110) Display : Customize the display settings. (p. 110) Connectivity : Set the connection options. (p. 111) General : Change the settings for the camera system such as memory format and default file name. (p. 112) Settings 110 Settings menu Sound * Default Item Description Volume Set the volume of any sound. ( Off , Low , Medium *, High ) Beep Sound Set to emit sounds when you touch the screen or switch modes. ( Off , On *) Shutter Sound Set the sound the camera emits when you press the shutter button. ( Off , 1 *, 2 , 3 ) Start Sound Set the sound the camera emits when you turn on your camera. ( Off *, 1 , 2 , 3 ) AF Sound Set to emit a sound when you half-press the shutter button. ( Off , On *) Display * Default Item Description Start Image Set a start image to display when the camera turns on. • Off *: Display no start image. • Logo : Display a default image stored in the internal memory. • User Image : Display a custom image. (p. 94) • The camera will save only one User Image in the internal memory at a time. • If you select a new photo as a User Image or reset your camera, the camera will delete the current image. Guide Line Set a grid to help you compose a scene. ( 2 X 2 *, 3 X 3 , X , + ) Settings 111 Settings menu Item Description Display Brightness Adjust the brightness of the screen. ( Auto *, Dark , Normal , Bright ) Normal is fixed in Playback mode even if you have selected Auto . Quick View Set the duration for reviewing a captured image before returning to the Shooting mode. ( Off , 0.5 sec *, 1 sec , 3 sec ) Power Save If you perform no operations for 30 seconds, the camera automatically switches to Power save mode. ( Off *, On ) • In Power save mode, press any button other than [ POWER ] to resume using the camera. • Even if you do not set the Power save mode, the screen will dim 30 seconds after the last operation to save power. Connectivity * Default Item Description Anynet+ (HDMI- CEC) Set whether or not to control the camera with a TV remote control when you connect it to an HDTV that supports the Anynet+(CEC) profile. • Off : View files without using an HDTV remote control. • On *: Control the camera with an HDTV remote control. HDMI Size Set the resolution of photos when the camera plays back files on an HDTV via the HDMI cable. (NTSC: 1080i *, 720p , 480p /PAL: 1080i *, 720p , 576p ) • If the HDTV does not support the selected resolution, the HDTV automatically selects the next lower resolution. • If you select 480p or 576p , the playback menus and Smart Album will not be available when you connect the camera to a TV. * Default Settings 112 Settings menu Item Description Video Out Set the video signal output for your region. • NTSC *: USA, Canada, Japan, Korea, Taiwan, Mexico • PAL (supports only BDGHI): Australia, Austria, Belgium, China, Denmark, England, Finland, Germany, Italy, Kuwait, Malaysia, Netherlands, New Zealand, Norway, Singapore, Spain, Sweden, Switzerland, Thailand USB Select the mode to use when you connect the camera to a computer or printer with a USB cable. • Computer *: Connect your camera to a computer for transferring files. • Printer : Connect your camera to a printer for printing files. • Select Mode : Manually select the USB mode when you connect your camera to a device. PC Software Set Intelli-studio to launch automatically when you connect your camera to your computer. ( Off , On *) General * Default Item Description Language Set a language for the display text. Time Zone Set the time zone for your location. When you travel to another country, touch Visit , and then touch the appropriate time zone. Date/Time Set Set the date and time. Date Type Set a date format. ( YYYY/MM/DD , MM/DD/YYYY , DD/MM/YYYY , Off *) * Default Settings 113 Settings menu Item Description File No. Specify how to name files. • Reset : Set the file number to start from 0001 when you insert a new memory card, format a memory card, or delete all files. • Series *: Set the file number to resume from the previous file number when you insert a new memory card, format a memory card, or delete all files. • The default name of the first folder is 100PHOTO and the default name of the first file is SAM_0001. • The file number increases one at a time from SAM_0001 to SAM_9999. • The folder number increases one at a time from 100PHOTO to 999PHOTO. • The maximum number of files that can be stored in one folder is 9,999. • The camera defines file names according to the Design rule for Camera File system (DCF) standard. If you intentionally change file names, the camera may not play back the files. Item Description Auto Rotate Set to automatically rotate photos as you rotate the camera. ( Off , On *) Imprint Set to display the date and time on captured photos. ( Off *, Date , Date & Time ) • The date and time will be displayed on the bottom right corner of the photo. • Some printer models may not print the date and time properly. • If you select Text in Scene mode, the camera will not display the date and time. Auto Power Off Set the camera to automatically turn off when you perform no operations for a specified period. ( Off , 1 min , 3 min *, 5 min , 10 min ) • Your settings will not change when you replace the battery. • The camera will not automatically turn off when the camera is connected to a computer or printer, when you are playing a slide show or videos, and when you are recording a voice memo. AF Lamp Set a light to automatically turn on in dark places to help the camera focus. ( Off , On *) * Default * Default Settings 114 Settings menu Item Description Format Format the internal memory and the memory card. Formatting will delete all files, including protected files. ( Yes , No ) Errors can occur if you use a memory card formatted by another brand of camera, a memory card reader, or a computer. Please format memory cards in the camera before using them to capture photos. Reset Reset menus and shooting options except date and time, language, and video output settings. ( Yes , No ) Touch Calibration Calibrate the touch screen so that your camera will properly recognize your inputs. * Default Error messages ……………………………………… 116 Camera maintenance ………………………………… 117 Cleaning your camera ……………………………… 117 Using or storing the camera ………………………… 118 About memory cards ……………………………… 119 About the battery …………………………………… 121 Before contacting a service center ………………… 125 Camera specifications ……………………………… 128 Glossary ……………………………………………… 132 FCC notice …………………………………………… 137 Index …………………………………………………… 138 Appendixes Get information about error messages, specifications, and maintenance. Appendixes 116 Error messages When the following error messages appear, try these remedies. Error message Suggested remedies Card Error • Turn off your camera, and then turn it on again. • Remove your memory card, and then insert it again. • Format your memory card. Card not supported. The inserted memory card is not supported by your camera. Insert a microSD or microSDHC memory card. DCF Full Error File names do not match the DCF standard. Transfer the files on the memory card to your computer, and then format the card. File Error Delete the damaged file or contact a service center. File system not supported. Your camera does not support the FAT file structure of the inserted memory card. Format the memory card on the camera. Low Battery Insert a charged battery or recharge the battery. Memory Full Delete unnecessary files or insert a new memory card. No Image File Capture photos or insert a memory card that contains some photos. Appendixes 117 Camera maintenance Camera body Wipe gently with the cleaner. • Never use benzene, thinners, or alcohol to clean the camera. These solutions can damage the camera or cause it to malfunction. • Do not press on the lens cover or use a blower brush on the lens cover. Cleaning your camera Camera lens and touch screen Use a blower brush to remove dust and wipe the lens gently with a soft cloth. If any dust remains, apply lens cleaning liquid to a piece of lens cleaning paper and wipe gently. Appendixes 118 Camera maintenance Using on beaches or shores • Protect your camera from sand and dirt when you use it on beaches or in other similar areas. • Your camera is not waterproof. Do not handle the battery, adapter, or memory card with wet hands. Operating the camera with wet hands may cause damage to your camera. Storing for extended period of time • When you store the camera for an extended period, place it in a sealed container with an absorbent material, such as silica gel. • Remove the batteries from your camera when storing it for an extended period. Installed batteries may leak or corrode over time and cause serious damage to your camera. • Over time, unused batteries will discharge and must be recharged before use. Using the camera with caution in humid environments When you transfer the camera from a cold environment to a warm one, condensation can form on the lens or internal components of the camera. In this situation, turn off the camera and wait for at least 1 hour. If condensation forms on the memory card, remove the memory card from the camera and wait until all moisture has evaporated before reinserting it. Using or storing the camera Inappropriate places to use or store the camera • Avoid exposing the camera to very cold or very hot temperatures. • Avoid using your camera in areas with extremely high humidity, or where the humidity changes drastically. • Avoid exposing the camera to direct sunlight and storing it in hot, poorly-ventilated areas, such as in a car during summertime. • Protect your camera and the display from impact, rough handling, and excessive vibration to avoid serious damage. • Avoid using or storing your camera in dusty, dirty, humid, or poorly-ventilated areas to prevent damage to moving parts and internal components. • Do not use your camera near fuels, combustibles, or flammable chemicals. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the camera or its accessories. • Do not store the camera where there are mothballs. Appendixes 119 Camera maintenance • Paint or metal on the outside of the camera may cause allergies, itchy skin, eczema, or swelling for people with sensitive skin. If you experience any of these symptoms, stop using the camera immediately and consult a doctor. • Do not insert foreign objects into any of your camera’s compartments, slots, or access points. Damage due to improper use may not be covered by your warranty. • Do not allow unqualified personnel to service the camera or attempt to service the camera yourself. Any damage that results from unqualified service is not covered by your warranty. About memory cards Supported memory cards Your camera supports microSD (Secure Digital) or microSDHC (Secure Digital High Capacity) memory cards. To read data with a PC or memory card reader, insert the memory card into a memory card adapter. Other cautions • Do not swing your camera by the strap. This may cause injury to yourself or others or damage to your camera. • Do not paint your camera, as paint can clog moving parts and prevent proper operation. • Turn off the camera while not in use. • Your camera consists of delicate parts. Avoid impacts to the camera. • Protect the display from external force by keeping it in the case when not in use. Protect the camera from scratches by keeping it away from sand, sharp implements, or loose change. • Do not expose the lens to direct sunlight, as this may discolor the image sensor or cause it to malfunction. • Protect your lens from fingerprints and scratches. Clean your lens with a soft, clean, debris-free lens cloth. • The camera may turn off if subjected to a sudden impact. This is to protect the memory card. Turn on the camera to use it again. • While you use the camera, it may heat up. This is normal and should not affect your camera’s lifespan or performance. • When you use the camera in low temperatures, it may take some time to turn on, the screen color may be changed temporarily, or after-images may appear. These conditions are not malfunctions and they will correct themselves when the camera is returned to normal temperatures. Appendixes 120 Camera maintenance Memory card capacity The memory capacity may vary depending on the scenes you shoot or the shooting conditions. The capacities below are based on a 1 GB microSD card: Size Super Fine Fine Normal 30 FPS 15 FPS P h o t o s 122 180 236 - - 140 205 270 - - 161 236 310 - - 192 280 366 - - 364 524 670 - - 586 822 1,033 - - 789 1,086 1,338 - - 1,350 1,850 2,300 - - * V i d e o s - - - Approx. 10' 10" Approx. 20' 00'' - - - Approx. 11' 56" Approx. 20' 00" - - - Approx. 25' 56" Approx. 40' 00'' - - - Approx. 69' 03" Approx. 100' 15" - - - Approx. 36' 41" Approx. 62' 33" * Available recording time may vary if you use the zoom. Several videos were recorded in succession to determine the total recording time. Cautions when using memory cards • Insert a memory card in the correct direction. Inserting a memory card in the wrong direction may damage your camera and memory card. • Do not use memory cards that have been formatted by other cameras or by a computer. Reformat the memory card with your camera. • Turn off the camera when you insert or remove the memory card. • Do not remove the memory card or turn off your camera while the lamp is blinking, as this may damage your data. • When the lifespan of a memory card has expired, you cannot store any more photos on the card. Use a new memory card. • Do not bend, drop, or subject memory cards with heavy impact or pressure. • Avoid using or storing memory cards near strong magnetic fields. • Avoid using or keeping memory cards in areas with high temperature, high humidity, or corrosive substances. • Prevent memory cards from making contact with liquids, dirt, or foreign substances. If dirty, wipe the memory card clean with a soft cloth before you insert the memory card into your camera. • Do not allow liquids, dirt, or foreign substances to come in contact with memory cards or the memory card slot. Doing so may cause memory cards or the camera to malfunction. Appendixes 121 Camera maintenance Battery life Average shooting time / Number of photos Test conditions (when the battery is fully charged) Photos Approximately 90 min/ Approximately 180 photos This is measured under the following conditions: in Program mode, in the darkness, at resolution, with OIS off, on Fine quality. 1. Set the flash option to Fill in , take a single shot, and zoom in or out. 2. Set the flash option to Off , take a single shot, and zoom in or out. 3. Perform steps 1 and 2 for 30 seconds and repeat for 5 minutes. Then turn off the camera for 1 minute. 4. Repeat steps 1 to 3. Videos Approximately 60 min Record videos at resolution and . • The figures above are measured using Samsung’s standards. Your results may vary, depending on your actual usage. • Several videos were recorded in succession to determine the total recording time. • When you carry a memory card, use a case to protect the card from electrostatic discharges. • Transfer important data to other media, such as a hard disk, CD, or DVD. • When you use the camera for an extended period, the memory card may become warm. This is normal and does not indicate a malfunction. The manufacturer is not responsible for any loss of data. About the battery Use only Samsung-approved batteries. Battery specifications Specification Description Model BP70A Type Lithium-ion battery Cell capacity 740 mAh (min. 700 mAh) Voltage 3.7 V Charging time* (when the camera is switched off) Approximately 150 min * Charging the battery by connecting it to a computer may take longer. Appendixes 122 Camera maintenance Cautions about using the battery Protect batteries, chargers, and memory cards from damage Prevent batteries from making contact with metal objects. This can create a connection between the + and – terminals of your battery and lead to temporary or permanent battery damage and may cause a fire or electric shock. Notes about charging the battery • If the indicator light is off, make sure that the battery is inserted correctly. • If the camera is on while the battery is charging, the battery may not fully charge. Turn off the camera before charging the battery. • Do not use your camera when you charging the battery. This may cause a fire or electric shock. • Do not pull the power supply cord to disconnect the plug from the power outlet, as this may cause a fire or electric shock. • When you are charging the battery, let the battery charged for at least 10 minutes before turning on the camera again. • If you connect the camera to an external power source when the battery is depleted, using some high energy-consuming functions will cause the camera to turn off. To use the camera normally, recharge the battery. Low battery message When the battery has fully charge has fully discharged, the battery icon will turn red and the " Low Battery " message will appear. Notes about using the battery • Avoid exposing batteries or memory cards to very cold or very hot temperatures (below 0 ºC/32 ºF or above 40 ºC/104 ºF). Extreme temperatures can reduce the charging capacity of your batteries and can cause memory cards to malfunction. • When you use the camera for an extended period, the area around the battery chamber may become warm. This does not affect the normal use of the camera. • Do not pull the power supply cord to disconnect the plug from the power outlet, as this may cause a fire or electric shock. • In temperatures below 0 ºC/32 ºF, battery capacity and battery life may decrease. • Battery capacity may decrease in low temperatures but will return to normal in milder temperatures. Appendixes 123 Camera maintenance Handling and disposing of batteries and chargers with care • Never dispose of batteries in a fire. Follow all local regulations when you dispose of used batteries. • Never place batteries or cameras on or in heating devices, such as microwave ovens, stoves, or radiators. Batteries may explode when they are overheated. • Using the flash or recording videos depletes the battery quickly. Charge the battery until the indicator light turns green. • If the indicator light blinks in orange or does not illuminate, reconnect the cable, or remove the battery and insert it again. • If you charge the battery when the cable is overheated or the temperature is too high, the indicator light may turn orange. Charging will start when the battery cools down. • Overcharging batteries may shorten battery life. After charging is finished, disconnect the cable from your camera. • Do not bend or place heavy objects on the AC cable. Doing so may damage the cable. Notes about charging with a computer connected • Use only the provided USB cable. • The battery may not charge when: - you use a USB hub - other USB devices are connected to your computer - you connect the cable to the port on the front side of your computer - the USB port of your computer does not support the power output standard (5 V, 500 mA) Appendixes 124 Camera maintenance Personal injury or death can occur if the battery is handled carelessly or improperly. For your safety, follow these instructions for proper battery handling: • The battery can ignite or explode if not handled properly. If you notice any deformities, cracks, or other abnormalities in the battery, immediately discontinue use of the battery and contact a service center. • Use only authentic, manufacturer-recommend battery chargers and adapters and charge the battery only by the methods described in this user manual. • Do not place the battery near heating devices or expose it to excessively warm environments, such as the inside of an enclosed car in the summertime. • Do not place the battery in a microwave oven. • Avoid storing or using the battery in hot, humid places, such as spas or shower enclosures. • Do not rest the device on flammable surfaces, such as bedding, carpets, or electric blankets for a prolonged period. • When the device is switched on, do not leave it in any confined space for a prolonged period. • Do not allow battery terminals to come in contact with metallic objects, such as necklaces, coins, keys, or watches. • Use only authentic, manufacturer-recommended, Lithium- ion replacement batteries. • Do not disassemble the battery or puncture it with any sharp object. • Avoid exposing the battery to high pressure or crushing forces. • Avoid exposing the battery to major impacts, such as dropping it from high places. • Do not expose the battery to temperatures of 60 °C (140 °F) or above. • Do not allow the battery to come in contact with moisture or liquids. • Do not expose the battery to sources of excessive heat such as direct sunshine, fire or the like. Disposal guidelines • Dispose of the battery with care. • Do not dispose of the battery in a fire. • Disposal regulations may differ by country or region. Dispose of the battery in accordance with all local and federal regulations. Guidelines for charging the battery Charge the battery only by the method described in this user manual. The battery can ignite or explode if not charged properly. Appendixes 125 Before contacting a service center If you are having trouble with your camera, try these troubleshooting procedures before you contact a service center. If you have attempted the suggested remedy and are still having problems with your device, contact your local dealer or service center. When you leave your camera at a service center, be sure to also leave the other components that may have contributed to the malfunction, such as the memory card and battery. Situation Suggested remedies Cannot capture photos • There is no space on the memory card. Delete unnecessary files or insert a new card. • Format the memory card. • The memory card is defective. Get a new memory card. • Make sure that the camera is switched on. • Charge the battery. • Make sure that the battery is inserted correctly. The camera freezes Remove the battery and insert it again. The camera heats up While you use the camera, it may heat up. This is normal and should not affect your camera’s lifespan or performance. The flash does not work • The flash option may be set to off. (p. 59) • You cannot use the flash in some modes. Situation Suggested remedies Cannot turn on the camera • Ensure that the battery is inserted. • Ensure that the battery is inserted correctly. (p. 16) • Charge the battery. The power turns off suddenly • Charge the battery. • Your camera may be in Power save mode. (p. 111) • The camera may turn off to prevent the memory card from being damaged due to an impact. Turn on your camera again. The camera is losing battery power quickly • The battery may lose power more quickly in low temperatures (below 0 °C/32 °F). Keep the battery warm by putting it into your pocket. • Using the flash or recording videos depletes the battery quickly. Recharge if needed. • Batteries are consumable parts that must be replaced over time. Get a new battery if the battery life is diminishing quickly. Appendixes 126 Before contacting a service center Situation Suggested remedies The flash fires unexpectedly The flash may fire due to static electricity. The camera is not malfunctioning. The date and time are incorrect Set the date and time in the display settings. (p. 112) The touch screen or buttons do not work Remove the battery and insert it again. The camera screen responds poorly If you use your camera at very low temperatures, it may cause the camera screen to malfunction or discolor. For better performance of your camera screen, use your camera in moderate temperatures. The memory card has an error • Turn off your camera and then turn it on again. • Remove your memory card and insert it again. • Format your memory card. See “Cautions when using memory cards” for more detail. (p. 120) Cannot play back files If you change the name of a file, your camera may not play the file (the name of the file should meet the DCF standard). If you encounter this situation, play back the files on your computer. Situation Suggested remedies The photo is blurry • Make sure that the focus option you set is suitable for close-up shots. (p. 62) • Make sure that the lens is clean. If not, clean the lens. (p. 117) • Make sure that the subject is within range of the flash. (p. 129) The colors in the photo do not match the actual scene An incorrect White Balance can create unrealistic color. Select the proper White Balance option to suit the light source. (p. 71) The photo is too bright Your photo is overexposed. • Turn off the flash. (p. 59) • Adjust the ISO sensitivity. (p. 61) • Adjust the exposure value. (p. 69) The photo is too dark Your photo is underexposed. • Turn on the flash. (p. 59) • Adjust the ISO sensitivity. (p. 61) • Adjust the exposure value. (p. 69) Appendixes 127 Before contacting a service center Situation Suggested remedies The TV does not display your photos • Make sure that the camera is correctly connected to the TV with the A/V cable. • Make sure that your memory card contains photos. Your computer does not recognize your camera • Make sure that the USB cable is connected correctly. • Make sure that your camera is switched on. • Make sure that you are using a supported operating system. Your computer disconnects the camera while transferring files The file transmission may be interrupted by static electricity. Disconnect the USB cable and connect it again. Your computer cannot play videos Videos may not play on some video player programs. To play video files captured with your camera, install and use the Intelli-studio program on your computer. (p. 101) Situation Suggested remedies Intelli-studio is not functioning properly • End Intelli-studio and restart the program. • You cannot use Intelli-studio on Macintosh computers. • Make sure that PC Software is turned on in the settings menu. (p. 112) • Depending on your computer's specifications and environment, the program may not launch automatically. In this case, click Start “ My Computer “ Intelli-studio “ iStudio.exe on your computer. Appendixes 128 Camera specifications Focusing Type TTL auto focus (Multi AF, Center AF, Smart Face Recognition AF, Face Detection AF, Smart Touch AF, One Touch Shooting AF) Range Wide (W) Tele (T) Normal (AF) 80 cm-infinity 150 cm-infinity Macro 5 cm-80 cm 100 cm-150 cm Auto Macro 5 cm-infinity 100 cm-infinity Shutter speed • Smart Auto: 1/8-1/2,000 sec. • Program: 1-1/2,000 sec. • Night Shot: 16-1/2,000 sec. • Fireworks: 2 sec. Exposure Control Program AE Metering Multi, Spot, Center-weighted, Face Detection Compensation ±2EV (1/3 EV Step) ISO equivalent Auto, ISO 80, ISO 100, ISO 200, ISO 400, ISO 800, ISO 1600, ISO 3200 Image sensor Type 1/2.33" (Approximately 7.76 mm) CCD Effective pixels Approximately 16.1 mega-pixels Total pixels Approximately 16.4 mega-pixels Lens Focal length Schneider-KREUZNACH f = 4.7 mm-23.5 mm (35 mm film equivalent: 26 mm-130 mm) F-stop range F3.3 (W)-F5.9 (T) Digital zoom • Still image mode: 1.0X-4.0X (Optical zoom x Digital zoom: 20.0X) • Playback mode: 1.0X-10.2X Display Type TFT LCD Feature • Main display: 3.0" (7.62 cm) Wide 230 K/ Full Touch LCD • Front display: 1.8" (4.6 cm) 116K TFT LCD Appendixes 129 Camera specifications Flash Mode Auto, Red-eye, Fill in, Slow Sync, Off, Red-eye Fix Range • Wide: 0.2 m-3.2 m (ISO Auto) • Tele: 1.0 m-1.8 m (ISO Auto) Recharging time Approximately 4 sec. Shake reduction DUAL IS [Optical Image Stabilization (OIS) + Digital Image Stabilization (DIS)] Effect Photo Shooting mode • Photo Filter (Smart Filter): (Normal), Miniature, Vignetting, Soft Focus, Old Film 1, Old Film 2, Half Tone Dot, Sketch, Fish-eye, Defog, Classic, Retro, Negative, (Custom RGB) • Image Adjust: Sharpness, Contrast, Saturation Video Shooting mode • Palette Effect Shot: Palette Effect 1, Palette Effect 2, Palette Effect 3, Palette Effect 4 • Movie Filter (Smart Filter): (Normal), Miniature, Vignetting, Half Tone Dot, Sketch, Fish-eye, Defog, Classic, Retro, Negative, (Custom RGB) White Balance Auto WB, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten, Custom Set Date Imprinting Date & Time, Date, Off Shooting Photos • Modes: Smart Auto*, Program, Scene*, Simple Shot, Magic Frame shot, Beauty Shot, Night Shot, Close-up Shot, Vignetting, Photo Filter, DUAL IS, Pose Guide, Children, Jump Shot, Self-Shot * Smart Auto: Macro, Macro text, Portrait, White, Landscape, Action, Tripod, Night, Night Portrait, Backlight, Backlight Portrait, Blue Sky, Sunset, Macro Color, Natural Green, Fireworks * Scene: Landscape, Text, Sunset, Dawn, Backlight, Beach & Snow • Drive: Single, Continuous, Motion Capture, AEB • Timer: 2 Sec, 10 Sec Appendixes 130 Camera specifications Videos • Modes: Movie, Smart Movie*, Vignetting, Movie Filter, Palette Effect Shot * Smart Movie: Landscape, Blue Sky, Natural Green, Sunset • Format: MP4 (H.264) (Maximum recording time: 20 min) • Size: 1280 X 720 HQ, 1280 X 720, 640 X 480, 320 X 240, Front Movie • Frame rate: 30 FPS, 15 FPS • Voice: Mute, Sound Alive On, Sound Alive Off • OIS: On, Off • Video editing (embedded): Pause during recording, Still image capture, Time trimming Playback Type Single image, Thumbnails, Multi-slide show with music and effect, Movie clip, Smart Album*, Magazine View * Smart Album category: Type, Date, Face Edit Resize, Rotate, Image Adjust, Trim, Smart Filter Effect • Image Adjust: Face Retouch, Brightness, Saturation, Contrast, Red-eye Fix • Smart Filter: Miniature, Vignetting, Soft Focus, Old Film 1, Old Film 2, Half Tone Dot, Sketch, Fish-eye, Defog, Classic, Retro, Negative, Custom RGB Voice recording • Voice Recording (Maximum 10 hours) • Voice Memo in a photo (Maximum 10 sec.) Storage Media • Internal memory: Approximately 9.7 MB • External memory (Optional): microSD card (up to 4 GB guaranteed), microSDHC card (up to 8 GB guaranteed) Internal memory capacity may not match these specifications. File format • DCF, EXIF 2.21, DPOF 1.1, PictBridge 1.0 • Still Image: JPEG (DCF) • Movie Clip: MP4 (Video: MPEG-4.AVC/H.264, Audio: AAC) • Audio file: WAV Appendixes 131 Camera specifications Image size For 1 GB microSD: Number of photos Super Fine Fine Normal 4608 X 3456 122 180 236 4608 X 3072 140 205 270 4608 X 2592 161 236 310 3648 X 2736 192 280 366 2592 X 1944 364 524 670 1984 X 1488 586 822 1,033 1920 X 1080 789 1,086 1,338 1024 X 768 1,350 1,850 2,300 These figures are measured under Samsung’s standard conditions and may vary depending on the shooting conditions and camera settings. Interface Digital output connector USB 2.0 Audio input/output Internal speaker (Mono), Microphone (Mono) Video output • A/V: NTSC, PAL (selectable) • HDMI 1.4: NTSC, PAL (selectable) DC power input connector 20 pin, 4.2 V Power source Rechargeable battery Lithium-ion battery (BP70A, 740 mAh: Min 700 mAh) The power source may differ depending on your region. Dimensions (W X H X D) 98.5 X 55.0 X 19.8 mm (without protrusions) Weight 121.0 g (without battery and memory card) Operating Temperature 0-40 °C Operating Humidity 5-85 % Software Intelli-studio Specifications may change without notice to improve performance. Appendixes 132 Glossary Composition Composition in photography means arranging objects in a photo. Usually, abiding by the rule of thirds leads to a good composition. DCF (Design rule for Camera File system) A specification to define a file format and file system for digital cameras created by the Japan Electronics and Information Technology Industries Association (JEITA). Depth of field The distance between the nearest and farthest points that can be acceptably focused in a photograph. Depth of field varies with lens aperture, focal length, and distance from the camera to the subject. Selecting a smaller aperture, for example, will increase the depth of field and blur the background of a composition. Digital zoom A feature that artificially increases the amount of zoom available with a zoom lens (Optical zoom). When using the Digital zoom, the image quality will deteriorate as the magnification increases. DPOF (Digital Print Order Format) A format for writing printing information, such as selected images and number of prints, on a memory card. DPOF-compatible printers, sometimes available at photo shops, can read the information from the card for convenient printing. ACB (Auto Contrast Balance) This feature automatically improves the contrast of your images when the subject is backlit or when there is a high contrast between your subject and the background. AEB (Auto Exposure Bracket) This feature automatically captures several images at different exposures to help you capture a properly-exposed image. AF (Auto Focus) A system that automatically focuses the camera lens on the subject. Your camera uses the contrast to focus automatically. Aperture The aperture controls the amount of light that reaches the camera’s sensor. Camera shake (Blur) If the camera is moved while the shutter is open, the entire image may appear blurred. This occurs more often when the shutter speed is slow. Prevent camera shake by raising the sensitivity, using the flash, or using a faster shutter speed. Alternately, use a tripod, the DIS or OIS function to stabilize the camera. Appendixes 133 Glossary EV (Exposure Value) All the combinations of the camera’s shutter speed and lens aperture that result in the same exposure. EV Compensation This feature allows you to quickly adjust the exposure value measured by the camera, in limited increments, to improve the exposure of your photos. Set the EV compensation to -1.0 EV to adjust the value one step darker and 1.0 EV to one step brighter. Exif (Exchangeable Image File Format) A specification to define an image file format for digital cameras created by the Japan Electronic Industries Development Association (JEIDA). Exposure The amount of light allowed to reach the camera’s sensor. Exposure is controlled by a combination of the shutter speed, the aperture value, and ISO sensitivity. Flash A speed light that helps to create adequate exposure in low-light conditions. Focal length The distance from the middle of the lens to its focal point (in millimeters). Longer focal lengths result in narrower angles of view and the subject is magnified. Shorter focal lengths result in wider angles of view. Histogram A graphical representation of the brightness of an image. The horizontal axis represents the brightness and the vertical axis represents the number of pixels. High points at the left (too dark) and right (too bright) on the histogram indicate a photo that is improperly exposed. H.264/MPEG-4 A high-compression video format established by international standard organizations ISO-IEC and ITU-T. This codec is capable of providing good video quality at low bit rates developed by the Joint Video Team (JVT). Image sensor The physical part of a digital camera that contains a photosite for each pixel in the image. Each photosite records the brightness of the light that strikes it during an exposure. Common sensor types are CCD (Charge-coupled Device) and CMOS (Complementary Metal Oxide Semiconductor). Appendixes 134 Glossary ISO sensitivity The sensitivity of the camera to light, based on the equivalent film speed used in a film camera. At higher ISO sensitivity settings, the camera uses a higher shutter speed, which can reduce blur caused by camera shake and low light. However, images with high sensitivity are more susceptible to noise. JPEG (Joint Photographic Experts Group) A lossy method of compression for digital images. JPEG images are compressed to reduce their overall file size with minimal deterioration of the image resolution. LCD (Liquid Crystal Display) A visual display commonly used in consumer electronics. This display needs a separate backlight, such as CCFL or LED, to reproduce colors. Macro This feature allows you to capture close-up photos of very small objects. When using the macro feature, the camera can maintain a sharp focus on small objects at a near life-size ratio (1:1). Metering The metering refers to the way in which the camera measures the quantity of light to set the exposure. MJPEG (Motion JPEG) A video format which is compressed as a JPEG image. Noise Misinterpreted pixels in a digital image that may appear as misplaced or random, bright pixels. Noise usually occurs when photos are shot with a high sensitivity or when a sensitivity is automatically set in a dark place. Optical zoom This is a general zoom which can enlarge images with a lens and does not deteriorate quality of images. Quality An expression of the rate of compression used in a digital image. Higher quality images have a lower rate of compression, which usually results in a larger file size. Resolution The number of pixels present in a digital image. High resolution images contain more pixels and typically show more detail than low resolution images. Appendixes 135 Glossary Shutter speed Shutter speed refers to the amount of time it takes to open and close the shutter, and it is an important factor in the brightness of a photo, as it controls the amount of light which passes through the aperture before it reaches the image sensor. A fast shutter speed allows less time to let light in and the photo becomes darker and more easily freezes subjects in motion. Vignetting A reduction of an image’s brightness or saturation at the periphery (outer edges) compared to the center of the image. Vignetting can draw interest to subjects positioned in the center of an image. White balance (color balance) An adjustment of the intensities of colors (typically the primary colors red, green, and blue), in an image. The goal of adjusting the white balance, or color balance, is to correctly render the colors in an image. Appendixes 136 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal. Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system. This Class [B] digital apparatus complies with Canadian ICES-003. PlanetFirst represents Samsung Electronics' commitment to sustainable development and social responsibility through eco-driven business and management activities. Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect Or call, (877) 278 - 0799 Appendixes 137 FCC notice • NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorientate, or relocate, the receiving antenna. - Increase the distance between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio / TV technician for help. • CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. • Declaration of Conformity Trade Name : Samsung Electronics America, Inc. Model No. : Samsung ST700 Responsible Party : Samsung Electronics America, Inc. Address : 85 Challenger Road, Ridgefield Park, NJ 07660 Telephone No. : 1-800-SAMSUNG (726-7864) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Appendixes 138 Brightness Playback mode 96 Shooting mode 69 Burst modes Auto Exposure Bracket 73 Continuous 73 Motion Capture 73 C Camera maintenance 117 Camera specifications 128 Charging 17 Children mode 44 Cleaning camera body 117 lens 117 touch screen 117 Close up shot Close-up Shot mode 36 macro 62 E Editing photos 94 Editing videos capturing 92 trimming 91 Enlarging 89 Error messages 116 F Face detection 65 Flash Auto 59 Fill in 60 Off 59 Red-eye 60 Red-eye fix 60 Slow sync 60 Focus area Center AF 64 Multi AF 64 One touch shooting 64 Smart Touch AF 64 Index A AF-assist light location 14 settings 113 AF Lamp 113 Anynet+ 111 Aperture value 37 Auto Exposure Bracket (AEB) 73 A/V port 14 B Battery caution 122 charging 17 inserting 16 Beauty Shot mode 37 Blink detection 66 Connecting to a computer Mac 105 Windows 100 Contrast Playback mode 96 Shooting mode 77 D Date/Time set 112 Deleting files 88 DIgital Print Order Format (DPOF) 97 Digital zoom 29 Disconnecting the camera 104 Display brightness 111 Display set 23 DUAL IS mode 39 Appendixes 139 Focus sound 110 Formatting 114 Front display customizing 44 Easy Self Shot 43 location 14 Self-Shot mode 43 turning on 28 G Guide lines 110 H Half-press shutter 31 HDMI Size 111 HDTV 99 Home button 15 Home screen 24 I Icons Home screen 24 Playback mode 84 Shooting mode 20 Image adjustment brightness Playback mode 96 Shooting mode 69 contrast Playback mode 96 Shooting mode 77 red-eye 97 saturation Playback mode 96 Shooting mode 77 sharpness 77 Image quality 56 Imprint 113 Intelli-studio 102 Intelli zoom 29 ISO sensitivity 61 J Jump Shot mode 46 L Language settings 112 Learning icons 20 M Macro 62 Magic Frame Shot mode 47 Memory card caution 120 inserting 16 Metering Center-weighted 70 Multi 70 Spot 70 Motion capture 73 Motion recognition 83 Movie Filter mode 49 Movie mode 41 My star ranking 84 registering 68 N Night Shot mode 37 O One touch shooting 64 Optical Image Stabilization(OIS) 30 Optional accessories 13 P Palette Effect mode 51 Photo Filter mode 47 PictBridge 106 Playback button 15 Playback mode 82 Index Appendixes 140 Pose Guide mode 40 Power button 14 Power save mode 111 Printing photos 106 Program mode 38 Protecting files 87 Q Quick view 111 R Red-eye Playback mode 97 Shooting mode 59 Reducing camera shake DUAL IS mode 39 Optical Image Stabilization(OIS) 30 Reset 114 Resolution Playback mode 94 Shooting mode 55 Retouching faces Playback mode 96 Shooting mode 37 Rotating 95 S Saturation Playback mode 96 Shooting mode 77 Scene mode 36 Self-Shot mode 43 Service center 125 Settings 109 Sharpness 77 Shooting portraits Beauty Shot mode 37 Blink detection 66 Face detection 65 Red-eye 60 Red-eye fix 60 Self Shot 43 Smart Face Recognition 67 Smile shot 66 Shutter button 14 Simple Shot mode 35 Slide show 90 Smart Album 85 Smart Auto mode 34 Smart Face Recognition 67 Smart Filter Playback mode 95 Shooting mode 74 Smart Movie mode 42 Smile shot 66 Sound settings 23 Start image 94, 110 Status lamp 15 T Thumbnails 85 Timer timer lamp 14 using the timer 58 Time settings 18, 112 Time zone settings 18, 112 Touch calibration 19, 114 Touch screen 15 Transferring files Mac 105 Windows 100 Tripod mount 14 Index Appendixes 141 U Unpacking 13 USB port 14 User buttons 38 Using the touch screen flicking 21 scrolling 21 touching 21 V Video playing 91 shooting 41 Viewing files page flip effect 86 slide show 90 Smart Album 85 thumbnails 86 TV 98 Vignetting mode 50 Voice memo playing 92 recording 52 W White balance 71 Z Zoom using the zoom 28 zoom button 15 zoom sound settings 78 Index Please refer to the warranty that came with your product or visit our website http://www.samsung.com/ for after-sales service or inquiries.